Locate a Daltile Stone Showroom and Slab Yard

Enter City and State or State Only

OR Enter Zip/Postal Code

Stone a' la Mod Natural Stone

Product Image

Roll over to zoom product

Linear Polished Nouveau Nero M312


Origin: China

 

Notes:

  • Consult your Daltile Architectural Representative for more information on special sizes. Some finishes may require extended lead times.
  • All slab material shown is not necessarily available in all areas.
Country of Origin China
Durability Floor 1 Residental - Suitable for residential use. Not Recommended for commercial areas.
Soundness Group C These stones may contain holes, voids, lines or separation and structural flaws. It is standard practice to repair these stones by filling them or reinforcing them.
Shade Variation L Low: Background color is relatively uniform.
Exterior Usage EW / S Suitable for covered exterior walls in freezing and non-freezing climates.
Suitable for exterior applications in non-freezing climates only.
Commercial Exterior Usage EW / S Suitable for covered exterior walls in freezing and non-freezing climates.
Suitable for exterior applications in non-freezing climates only.
Stock Tile Sizes And Finishes 5 3/4" x 1/2" x 3/8" (12" x 12" sheet) Polished
Stock Slab Sizes And Finishes N/A
Special Order Sizes Available N/A
Cut-To-Size Available N/A
Alternate Finishes Available By Special Order N/A
ASTM Test Method Value * * Technical values supplied by the Marble Institute of America (MIA) and American Society for Testing and Materials (ASTM); and provide a frame of reference only. Actual performance may vary.
Absorption by Weight, % C97 0.15 
Density, lbs./ft C97  
Compressive Strength, psi C170  
Abrasion Resistance, hardness C241  
Flexural Strength, psi C880  
Weather Resistance C217  
Modules of Rupture, psi C120  
Can be used in interior wet areas, if sealed and maintained properly. If not properly maintained, the stone look could be altered. Please contact your sealer manufacturer or your Daltile sales representative for information about products that can protect the stone from moisture exposure. Can be used in interior wet areas, if sealed and maintained properly. If not properly maintained, the stone look could be altered. Please contact your sealer manufacturer or your Daltile sales representative for information about products that can protect the stone from moisture exposure.
Might contain dry seams, pits, fossils, and glass veins that are filled at the factory or during installation. These are all inherent characteristics of the stone. Since these voids can sometimes lose their fillings, they should be refilled as part of normal maintenance. Might contain dry seams, pits, fossils, and glass veins that are filled at the factory or during installation. These are all inherent characteristics of the stone. Since these voids can sometimes lose their fillings, they should be refilled as part of normal maintenance.
A sealer is recommended.  (Note: Some limestone and tumbled stone should be sealed prior to grouting.) A sealer is recommended. (Note: Some limestone and tumbled stone should be sealed prior to grouting.)
Install with a non-staining epoxy. Do not use any water based setting material with these stones. Install with a non-staining epoxy. Do not use any water based setting material with these stones.