Marble Collection Natural Stone
Roll over to zoom product
Classic Green Onyx (Polished) M615
- Consult your Daltile Architectural Representative for more information on special sizes. Some finishes may require extended lead times.
- All slab material shown is not necessarily available in all areas.
|Country of Origin||Pakistan|
|Durability||1||Residental - Suitable for residential use. Not Recommended for commercial areas.|
|Soundness||Group D||Similar to Group C but these stones contain larger natural faults and require more refinishing over time.|
|Shade Variation||R||Random: Variegated in color and veining. Blending allowances during installation are strongly recommended.|
|Exterior Usage||N/A||Not recommended for exterior applications.|
|Commercial Exterior Usage||N/A||Not recommended for exterior applications.|
|Stock Tile Sizes And Finishes||12" x 12" x 3/8" Polished|
|Stock Slab Sizes And Finishes||3/4" (2cm) Polished
1 1/4" (3cm) Polished
|Special Order Sizes Available||N/A|
|Alternate Finishes Available By Special Order||N/A|
|ASTM Test Method||Value *||* Technical values supplied by the Marble Institute of America (MIA) and American Society for Testing and Materials (ASTM); and provide a frame of reference only. Actual performance may vary.|
|Absorption by Weight, %||C97||0.90|
|Compressive Strength, psi||C170||750.0 kg/cm2|
|Abrasion Resistance, hardness||C241||2.5-3.0|
|Flexural Strength, psi||C880||96.0 kg/cm2|
|Modules of Rupture, psi||C120||N/A|
|Not recommended in wet areas.|
|Might contain dry seams, pits, fossils, and glass veins that are filled at the factory or during installation. These are all inherent characteristics of the stone. Since these voids can sometimes lose their fillings, they should be refilled as part of normal maintenance.|
|A sealer is recommended. (Note: Some limestone and tumbled stone should be sealed prior to grouting.)|
|These stones caontain deposits or minerals and iron that may react to moisture. Stone bleeding or rusting is a common example of this. These stones should not be used in installations where they would be exposed to standing, run off water or too much humidity. A sealer is stronly recommended but will not prevent the chemical reaction from happening. Please contact your sealer manufacturer for information about products that can protect the stone from moisture exposure.|
|Install with a non-staining epoxy. Do not use any water based setting material with these stones.|
Consult your Daltile Architectural Representative for more information on special sizes.
Some finishes may require extended lead times.