Limestone Collection Natural Stone
Roll over to zoom product
Arctic Gray L757
- Consult your Daltile Architectural Representative for more information on special sizes. Some finishes may require extended lead times.
- All slab material shown is not necessarily available in all areas.
|Country of Origin||Turkey|
|Durability Floor||2||Medium/Light Commercial - Suitable for light commerical and residential use.|
|Soundness||Group B||Similar to Group A, but geological imperfections could be evident. These stones may contain holes or voids, which are filled with epoxy or resin.|
|Shade Variation||M||Medium: Background color contains slight variations.|
|Exterior Usage||EW||Suitable for covered exterior walls in freezing and non-freezing climates.|
|Commercial Exterior Usage||EW||Suitable for covered exterior walls in freezing and non-freezing climates.|
|Stock Tile Sizes And Finishes||12" x 12" x 3/8" Polished
18" x 18" x 5/8" Honed
|Stock Slab Sizes And Finishes||3/4" (2cm) Polished
1 1/4" (3cm) Polished
|Special Order Sizes Available||N/A|
|Alternate Finishes Available By Special Order||N/A|
|ASTM Test Method||Value *||* Technical values supplied by the Marble Institute of America (MIA) and American Society for Testing and Materials (ASTM); and provide a frame of reference only. Actual performance may vary.|
|Absorption by Weight, %||C97||0.316 +/- 0.194|
|Density, lbs./ft||C97||170.4 +/- 0.37|
|Compressive Strength, psi||C170||DRY 28398 +/- 2967
Saturated 24730 =/- 5369
|Abrasion Resistance, hardness||C241||N/A|
|Flexural Strength, psi||C880||DRY 1606.3 =/-249.9
Saturated 1258.4 =/-158.5
|Modules of Rupture, psi||C120||N/A|
|Can be used in interior wet areas, if sealed and maintained properly. If not properly maintained, the stone look could be altered. Please contact your sealer manufacturer or your Daltile sales representative for information about products that can protect the stone from moisture exposure.|
|Might contain dry seams, pits, fossils, and glass veins that are filled at the factory or during installation. These are all inherent characteristics of the stone. Since these voids can sometimes lose their fillings, they should be refilled as part of normal maintenance.|
|A sealer is recommended. (Note: Some limestone and tumbled stone should be sealed prior to grouting.)|
|White thin-set or mortar is recommended.|
Consult your Daltile Architectural Representative for more information on special sizes.
Some finishes may require extended lead times.