Limestone Collection Natural Stone
Roll over to zoom product
Jurastone Beige L711
- Consult your Daltile Architectural Representative for more information on special sizes. Some finishes may require extended lead times.
- All slab material shown is not necessarily available in all areas.
|Country of Origin||Germany|
|Durability Floor||3||Heavy Commercial - Suitable for most commercial and/or high traffic areas.|
|Soundness||Group A||Sound Stones with no geological voids or fissures. These stones do not require any filling or patching.|
|Shade Variation||M||Medium: Background color contains slight variations.|
|Exterior Usage||EW / EF||
Suitable for covered* exterior walls in freezing and non-freezing climates.
Suitable for covered* exterior floors in freezing and non-freezing climates.
|Commercial Exterior Usage||EW||Suitable for covered* exterior walls in freezing and non-freezing climates.|
|Stock Tile Sizes And Finishes||12" x 12" x 3/8" Honed
18" x 18" x 3/8" Honed
12" x 24" x 3/8" Honed
|Stock Slab Sizes And Finishes||3/4" (2cm) Honed
1 1/4" (3cm) Honed
|Special Order Sizes Available||Yes||Consult your Daltile Architectural Representative for more information on special sizes.|
|Alternate Finishes Available By Special Order||Brushed,Tumbled,Sandblasted,Split,Chiseled||Some finishes may require extended lead times.|
Covered* implies an area protected from the elements.
Natural stone products are not recommended for any wet areas where they may be exposed to chemicals such as waterlines and pools, among others.
NOTE: Polished surfaces are not recommended for floor areas where slip resistance is a concern. Our durability recommendations are only based on the technical characteristics of the stones, however, slip resistance shall still be taken into consideration when selecting the prduct for a specific application. Natural stone products do not meet minimum coefficient of friction thresholds recommended by safety standard setting organizations.
|ASTM Test Method||Value *||* Technical values supplied by the Marble Institute of America (MIA) and American Society for Testing and Materials (ASTM); and provide a frame of reference only. Actual performance may vary.|
|Absorption by Weight, %||C97||1.0|
|Density, lbs./ft3, (kg/m3)||C97||165.36|
|Compressive Strength, psi, (Mpa)||C170||19,994.0|
|Abrasion Resistance, hardness||C241||37.6|
|Flexural Strength, psi, (Mpa)||C880||1,550.0|
|Can be used in interior wet areas, if sealed and maintained properly. If not properly maintained, the stone look could be altered. Please contact your sealer manufacturer or your Daltile sales representative for information about products that can protect the stone from moisture exposure.|
|Might contain dry seams, pits, fossils, and glass veins that are filled at the factory or during installation. These are all inherent characteristics of the stone. Since these voids can sometimes lose their fillings, they should be refilled as part of normal maintenance.|
|A sealer is recommended. (Note: Some limestone and tumbled stone should be sealed prior to grouting.)|
|White thin-set or mortar is recommended.|
Consult your Daltile Architectural Representative for more information on special sizes.
Some finishes may require extended lead times.