Gallery ColorBody™ Porcelain


TruEdge products mean each tile is rectified and modular, which allows for the use of smaller grout joints and even more design flexibility.

Exterior Product
Exterior Product

Indicates products suitable for exterior applications.


Indicates the use of pre-consumer recycled material content in a product.

Certified Porcelain
Certified Porcelain

Indicates product is certified by the Porcelain Tile Certification Agency. Daltile is committed to providing only the highest quality porcelain products. Every porcelain product we offer has been certified - or is in the process of being certified - by the PTCA.

Product Image

Roll over to zoom product

Photo features Red & White Gallery field tile.

View all NEXT™ Series

Vibrant, edgy, and design focused is what Gallery is all about. Offering contemporary styling, Gallery is available in five bright solid colors as well as black and white. Floor Tile, Wall Tile, SlimLite™ Wall Tile, and a variety of modern Ridged, Grooved and Ruled design surfaces are also available for different applications. Large-scale sizes are offered in all sizes as well as a large Hexagon size offered in black and white. This trend-forward line offers designers and architects selection and style that will make a statement in any space.

Gallery is a ColorBody™ Porcelain Floor, Ceramic Wall, & SlimLite™ Porcelain Wall product.


  • (1), (2), and (3) indicate Price Groups, (1) being the least expensive.

  • *Yellow is not available in wall items.

  • Surfaces and Decorative Accents shown in Lime. All surfaces and decos available according to the chart above.

  • Special care should be taken when grouting with dark pigmented colors. A grout release is recommended to prevent finely powdered pigments from lodging in the pores of the tile surface.

  • Extended lead times apply. Please contact your SSC representative for more information.

Tile Thickness:
3/8" (10mm) - Floor, 12 x 24 Wall & Decos
7/16" (11.4mm) - 12 x 36 & 6 x 36 Wall
3/16" (4.8mm) - SlimLite Wall
Relative Pricing:
Grout Joint
1/8" (3/16" when rectangular sizes are used in a staggered brick-joint pattern, where the overlap does not exceed 33%.)
Shade Variation:
Low (V1)
  D.C.O.F. Moisture Breaking   Chemical Abrasion
Wet Absorption Strength MOH's Resistance Resistance
  Floor - Unpolished  > 0.42 <0.5%  >400 lbs. 8.0 Resistant N/A
  Floor - Polished  < 0.42 <0.5%  >400 lbs. 8.0 Resistant N/A
  Wall - SlimLite™  N/A <0.5%  >100 lbs. 6.0 Resistant N/A
  Wall Tile & Decos  N/A <11.0%  >200 lbs. 6.0 Resistant N/A

A DCOF value of > 0.42 is the new standard for tiles specified for commercial application in standard A137.1-2012, Section 9.6. It replaces the SCOF value of > 0.60 referenced in ASTM C1028. For more information on the correlation between the two values and about the DCOF AcuTest, click here for more information or visit the Tile Council of North America's website:

Manufacturers Warning:

  • These tiles have a dynamic coefficient of friction less than 0.42 as measured by the DCOF AcutestTM method. Tiles with DCOF Acutest values less than .42 are not recommended for use in areas with wet or slippery conditions. If such tiles are used as a walking surface where water, ice, oil, grease and/or other substances are present, such a condition could cause a reduction in foot traction and become unexpectedly slippery resulting in a fall and personal injury. See ANSI standard A137.1 section, available at
  • Water, oil, grease, etc. create slippery conditions. Floor applicatons with exposure to these conditions require extra caution in product selection. Not for use on ramps.
  • For addtional information, refer to Factors to Consider.
  • Since there is a shade variation on all natural products, the tile and trim supplied for your particular installation may not match these samples. Final selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards.
Floor Applications
Target DCOF wet Tile Texture or
Added Abrasive
Dry & Level n/a n/a  
Wet & Level ≥ 0.42 Optional  
Commercial Dining Areas ≥ 0.50 Optional  
Pool Decking & other wet areas with minimal footwear ≥ 0.55 Required if tile size is > 3x3  
Covered Exterior ≥ 0.60 Required if tile size is > 3x3  
Interior Ramps, Inclines and Uncovered Exterior ≥ 0.65 Required if tile size is > 6x6  
Other Applications
Pool Linings  


  • Polished surface is only suitable for Dry & Level floor applications.

  • Floor tile suitable for exterior applications in freezing and non-freezing climates when proper installation methods are followed.

  • Wall tile suitable for exterior applications in non-freezing climates when proper installation methods are followed.

Size     Shape
24 x 24 Floor Tile
(23 1/2" x 23 1/2")
(59.55 cm x 59.55 cm)
Pieces Per Carton: 3
SQFT: 11.44
(Polished & Unpolished)
  24" x 24" Floor Tile
12 x 24 Floor Tile/Accents
(11 11/16" x 23 1/2")
(29.75 cm x 59.55 cm)
Pieces Per Carton: 7
SQFT: 13.34
(Polished & Unpolished)
  12" x 24" Floor Tile/Accents
12 x 24 Ridged Accent
(11 11/16" x 23 1/2")
(29.75 cm x 59.55 cm)
Pieces Per Carton: 6
SQFT: 11.44
  12" x 24" Ridged Accent
20.31 x 23.45 Hexagon
(20.31" x 23.45")
(51.58 cm x 59.56 cm)
Pieces Per Carton: 3
SQFT: 9.87
  20.31" x 23.45" Hexagon
12 x 24 Wall Tile
(11 11/16" x 23 1/2")
(29.75 cm x 59.55 cm)
Pieces Per Carton: 6
SQFT: 11.44
(Polished & Unpolished)
  12" x 24" Wall Tile
12 x 24 SlimLite™ Wall Tile
(11 11/16" x 23 1/2")
(29.75 cm x 59.55 cm)
Pieces Per Carton: 11
SQFT: 20.96
  12" x 24" SlimLite™ Wall Tile
12 x 36 Wall Tile/Accents
(11 11/16" x 35 1/4")
(29.75 cm x 89.46 cm)
Pieces Per Carton: 4
SQFT: 11.46
(Polished & Unpolished)
  12" x 36" Wall Tile/Accents
6 x 36 Wall Tile
(5 13/16" x 35 1/4")
(14.74 cm x 89.46 cm)
Pieces Per Carton: 8
SQFT: 11.32
(Polished & Unpolished)
  6" x 36" Wall Tile
Description   Shape Number Size Shape
Bullnose   S-43C9 3 x 12 Bullnose S-43C9 - 3" x 12"
Bullnose   S-43F9 3 x 24 Bullnose S-43F9 - 3" x 24"


  • Floor bullnose trim is intended to coordinate with floor field tile in the standard 90-degree installation position.