Chalet ™ ColorBody™ Porcelain
Indicates products suitable for exterior applications.
Indicates the use of pre-consumer recycled material content in a product.
Indicates product is certified by the Porcelain Tile Certification Agency. Daltile is committed to providing only the highest quality porcelain products. Every porcelain product we offer has been certified - or is in the process of being certified - by the PTCA.
Roll over to zoom product
Photo features Pioppo 6 x 24 field tile on the floor.
View all NEXT™ Series
Special care should be taken when grouting with dark pigmented colors. A grout release is recommended to prevent finely powdered pigments from lodging in the pores of the tile surface.
Extended lead times apply. Please contact your SSC representative for more information.
|> 0.42||<0.5%||>400 lbs.||8.0||Resistant||N/A|
A DCOF value of > 0.42 is the new standard for tiles specified for commercial application in standard A137.1-2012, Section 9.6. It replaces the SCOF value of > 0.60 referenced in ASTM C1028. For more information on the correlation between the two values and about the DCOF AcuTest, click here for more information or visit the Tile Council of North America's website: www.tcnatile.com
|Target DCOF wet||Tile Texture or
|Dry & Level||n/a||n/a|
|Wet & Level||≥ 0.42||Optional|
|Commercial Dining Areas||≥ 0.50||Optional|
|Pool Decking & other wet areas with minimal footwear||≥ 0.55||Required if tile size is > 3x3|
|Covered Exterior||≥ 0.60||Required if tile size is > 3x3|
|Interior Ramps, Inclines and Uncovered Exterior||≥ 0.65||Required if tile size is > 6x6|
|6 x 24 Field Tile||
(5 7/8" x 23 5/8")
(15.0 cm x 60.0 cm)
Pieces Per Carton: 12
|Bullnose||S-43F9||3 x 24|
Floor bullnose trim is intended to coordinate with floor field tile in the standard 90-degree installation position.