Panoramic Porcelain Surfaces ™ Glazed Porcelain
Roll over to zoom product
Photo features Industrial Selection Hearth Smoke matte on the countertop.
Elemental Selection - Available in matte & glossy finishes
Industrial Selection - Available in matte finish only
Use of an LFT (Large Format Tile) mortar is required. Thin-set mortars are not suitable for Panoramic Porcelain Surfaces.
Since there are variations in all fired ceramic products, tile supplied for your particular installation may not match these samples. Final color selection should be made from actual panels and not from product samples or color reproductions.
Water, oil, grease, etc. create slippery conditions. Floor applications with exposure to these conditions require extra caution in product selection. Not for use on ramps.
|Target DCOF wet||Suitable|
|Dry & Level - Interior Floor||n/a|
|Wet & Level - Interior Floor||≥ 0.42||*|
|Shower Floors (Residential or Light Commercial)||≥ 0.42|
|Exterior Floor Applications (including pool decking & other wet areas with minimal footwear)||≥ 0.60|
|Ramps & Inclines||≥ 0.65|
Suitable for exterior applications in freezing and non-freezing climates, when proper installation methods are followed.
* Matte finish only
|63 x 126 Slab||
(63" x 126")
(160.00 cm x 320.00 cm)
|64 x 127 Slab||
(64" x 127")
(162.00 cm x 322.00 cm)
Special consideration must be given when installing tiles greater than 15 inches. Please click here for more information.
Panoramic is eligible for the custom cut to size program. Please speak to your local Daltile representative for more information.