Suretread and Pavers ™ Suretread & Pavers
When your project goals require sourcing of materials made in the United States, look for this symbol to help you determine which of our product lines help you meet that standard. Icon indicates that all or select items within a series are made in the U.S.A.
Indicates products suitable for exterior applications.
Indicates the use of pre-consumer recycled material content in a product.
Roll over to zoom product
Red Suretread 0Q81
Manufacturing Plant: Lewisport, KY
Special care should be taken when grouting with dark pigmented colors. A grout release is recommended to prevent finely powdered pigments from lodging in the pores of the tile surface.
|Suretread||> 0.42||<3.0%||>400 lbs||7||Resistant||N/A|
|Paver||> 0.42||<3.0%||>400 lbs||7||Resistant||N/A|
A DCOF value of > 0.42 is the new standard for tiles specified for commercial application in standard A137.1-2012, Section 9.6. It replaces the SCOF value of > 0.60 referenced in ASTM C1028. For more information on the correlation between the two values and about the DCOF AcuTest, click here for more information or visit the Tile Council of North America's website: www.tcnatile.com
|Target DCOF wet||Tile Texture or
|Dry & Level||n/a||n/a|
|Wet & Level||≥ 0.42||Optional|
|Commercial Dining Areas||≥ 0.50||Optional|
|Pool Decking & other wet areas with minimal footwear||≥ 0.55||Required if tile size is > 3x3|
|Covered Exterior||≥ 0.60||Required if tile size is > 3x3|
|Subject to Oils||≥ 0.60||Optional|
|Interior Ramps, Inclines and Uncovered Exterior||≥ 0.65||Required if tile size is > 6x6|
Suitable for exterior applications in freezing and non-freezing climates when proper installation methods are followed.
We do not recommend light colored paver tile in commercial kitchens unless properly sealed. It is necessary to follow the proper procedures and recommendations from the grout and maintenance products manufactures.
*Tread surface only
|6 x 6 Field Tile||
(6" x 6")
(15.2 cm x 15.2 cm)
Pieces Per Carton: 48
Sizing differences may exist between Gray and Red colors. When mixing colors, check actual samples to ensure sizing compatibility.
|Bullnose||P-1665||6 x 6|
|Bullnose Corner||PC-1665||6 x 6|
|Cove||P-3665||6 x 6|
|Cove Corner||PCR-L-3665||6 x 6|
|Inside Cove Corner||PB-3665||3/4 x 6|
Suretread trim is a smooth trim. Tread surface is not available on trim.
Floor bullnose trim is intended to coordinate with floor field tile in the standard 90-degree installation position.