Ironcraft ™ ColorBody™ Porcelain
When your project goals require sourcing of materials made in the United States, look for this symbol to help you determine which of our product lines help you meet that standard. Icon indicates that all or select items within a series are made in the U.S.A.
This state-of-the-art digital printing process produces realistic color, detail and veining that is unique on every single tile, for a look that's virtually indistinguishable from natural stone. Click here to explore the benefits of Reveal Imaging.
TruEdge products mean each tile is rectified and modular, which allows for the use of smaller grout joints and even more design flexibility.
Indicates the use of pre-consumer recycled material content in a product.
Indicates product is certified by the Porcelain Tile Certification Agency. Daltile is committed to providing only the highest quality porcelain products. Every porcelain product we offer has been certified - or is in the process of being certified - by the PTCA.
Roll over to zoom product
Photo features Ironcraft™ Charcoal Grey and Rusted Bronze light polished 12 x 24 on the wall.
Random Interlocking Mosaic
2 x 2 Mosaic (Unpolished Only)
• URBAN APPEAL
-- Sweeping iron and cement graphics for striking lines and dimension
-- Dual texture treatment achieves a daring contrast
-- Available in unpolished and light polished finishes
• ARTISAN’S TOOLBOX
-- Tile and 2 x 2 mosaic available in five modern metallic colors
-- Featured in three floor tile sizes
-- Random interlocking mosaic available in three color blends, combining light polished and unpolished finishes
Since there are variations in all fired ceramic and natural products, tile and trim supplied for your particular installation may not match samples. Final confirmation should be made from actual tiles and trim prior to installation. Manufactured in accordance with ANSI A137.1 standards.
Not for use on ramps. Water, oil, grease, improper drainage and certain footwear can create slippery conditions. Floor applications expected to be exposed to these conditions require extra caution in product selection.
Random visuals enhance the natural beauty of this product. To achieve optimal results, all tile should be selected from multiple cartons and shading and graphic arrangement planned prior to installation.
Special care should be taken when grouting with dark pigmented colors. A grout release is recommended to prevent finely powdered pigments from lodging in the pores of the surface. Use of a latex modified thin-set is recommended for installation.
|> .42||< 0.5%||> 275 lbs.||8.0||Resistant||N/A|
A DCOF value of > 0.42 is the standard for tiles specified for level interior spaces expected to be walked upon when wet, as stated in ANSI A137.1-2012, Section 9.6. For more information about DCOF and the DCOF AcuTest™, click here or visit the Tile Council of North America's website: www.tcnatile.com.
|Target DCOF wet||Suitable|
|Dry & Level - Interior Floor||n/a|
|Wet & Level - Interior Floor||≥ 0.42||*|
|Shower Floors (Residential or Light Commercial)||≥ 0.42||^|
|Exterior Floor Applications (including pool decking & other wet areas with minimal footwear)||≥ 0.60|
|Ramps & Inclines||≥ 0.65|
Suitable for exterior applications in freezing and non-freezing climates, when proper installation methods are followed.
* Unpolished floor tile and mosaics suitable.
^ 2 x 2 mosaic tile only.
|24 x 24 Floor Tile||
(23 5/8" x 23 5/8")
(59.44 cm x 59.44 cm)
Pieces Per Carton: 4
|12 x 24 Floor Tile||
(11 5/8" x 23 5/8")
(29.56 cm x 59.44 cm)
Pieces Per Carton: 8
|2 x 2 Mosaic||
(12" x 12" Sheet)
(30.48 cm x 30.48 cm Sheet)
Pieces Per Carton: 10
|Random Interlocking Mosaic||
(15" x 12" Sheet)
(38.10 cm x 30.48 cm Sheet)
Pieces Per Carton: 7
Available in three unique color blends only with a random mix of light polished and unpolished pieces.
Special consideration must be given when installing tiles greater than 15 inches. Please click here for more information.
|Bullnose||P-43C9||3 x 12|
|Cove Base||P-36C9T||6 x 12|
|Cove Base Outcorner||PC-36C9T||1 x 6|
Bullnose, cove base and cove base corner trim are available in unpolished finish only. Bullnose in light polished finish is available through special order with extended lead time.
Floor bullnose and cove base trim are intended to coordinate with floor tile in the standard 90-degree installation position.
Cove base and cove corner trim are suitable for non-freezing climates only.