Delegate ™ ColorBody™ Porcelain

Reveal Imaging™
Reveal Imaging®

This state-of-the-art digital printing process produces realistic color, detail and veining that is unique on every single tile, for a look that's virtually indistinguishable from natural stone. Click here to explore the benefits of Reveal Imaging.


TruEdge products mean each tile is rectified and modular, which allows for the use of smaller grout joints and even more design flexibility.


Indicates the use of pre-consumer recycled material content in a product.

Certified Porcelain
Certified Porcelain

Indicates product is certified by the Porcelain Tile Certification Agency. Daltile is committed to providing only the highest quality porcelain products. Every porcelain product we offer has been certified - or is in the process of being certified - by the PTCA.

Product Image

Roll over to zoom product

Photo features Delegate™ Black 1 x 1 3D mosaic on the wall.

Delegate represents a contemporary and versatile design option for today’s spaces. The diagonal visual on this ColorBody™ porcelain tile is the subtle evidence of nature’s powerful geological movements. Gentle color movement in the white and grey shades offers a slight visual distinction from the darker, monochromatic black hue. This sedimentary slate-inspired design offers a rich visual with depth and interest in two tile sizes – plus a 20 x 40 tile paver in 2cm thickness suitable for exterior applications. Harmonize floor tile with a random linear mosaic or 3D brick-joint mosaic for a comprehensive stone look.

-- Compressed slate visual in four stately shades: off white, light grey, dark grey and black
-- The diagonal movement of slate in durable ColorBody™ porcelain tile

-- Two floor tile sizes plus a 20 x 40 tile paver in 2cm thickness
-- Rectified edges for smaller grout joints
-- Random linear mosaic, 3D mosaic and trim package available


  • Since there are variations in all fired ceramic and natural products, tile and trim supplied for your particular installation may not match samples. Final confirmation should be made from actual tiles and trim prior to installation. Manufactured in accordance with ANSI A137.1 standards.

  • Not for use on ramps. Water, oil, grease, improper drainage and certain footwear can create slippery conditions. Floor applications expected to be exposed to these conditions require extra caution in product selection.

  • Special consideration must be given when installing tiles greater than 15 inches. Please click here for more information.

  • Special care should be taken when grouting with dark pigmented colors. A grout release is recommended to prevent finely powdered pigments from lodging in the pores of the surface. Use of a latex modified thin-set is recommended for installation.

  • *Available in 2cm thickness in 20 x 40 size.

Tile Thickness:
3/8"; 20 x 40 - 13/16" (2cm)
Grout Joint
1/8" (3/16" when multiple sizes are installed in a modular pattern, and/or when installing tile with a length 15" or greater in a staggered brick-joint pattern; overlap should not exceed 33%.)
Shade Variation:
High (V3)
  D.C.O.F. Moisture Breaking   Chemical Abrasion
Wet Absorption Strength MOH's Resistance Resistance
  Floor & Mosaic  > .42 < 0.5%  > 300 lbs. 8.0 Resistant N/A
  Paver  > .42 < 0.5%  > 1000 lbs. 8.0 Resistant N/A

A DCOF value of > 0.42 is the standard for tiles specified for level interior spaces expected to be walked upon when wet, as stated in ANSI A137.1-2012, Section 9.6. For more information about DCOF and the DCOF AcuTest™, click here or visit the Tile Council of North America's website:

Floor Applications
Target DCOF wet Suitable
Dry & Level - Interior Floor n/a  
Wet & Level - Interior Floor ≥ 0.42  
Shower Floors (Residential or Light Commercial) ≥ 0.42  
Exterior Floor Applications (including pool decking & other wet areas with minimal footwear) ≥ 0.60   *
Ramps & Inclines ≥ 0.65  
Other Applications
Pool Linings  


  • Suitable for exterior applications in freezing and non-freezing climates, when proper installation methods are followed.

  • 1 x 1 3D mosaic suitable for wall applications only.

  • * 20 x 40 2cm paver tile only

Size     Shape
20 x 40 Paver Tile
(19 1/2" x 39 3/16")
(49.50 cm x 99.50 cm)
Pieces Per Carton: 1
SQFT: 5.38
Available in DL26 and DL27 only.
  20" x 40" Paver Tile
24 x 24 Floor Tile
(23 7/16" x 23 7/16")
(59.50 cm x 59.50 cm)
Pieces Per Carton: 3
SQFT: 11.64
  24" x 24" Floor Tile
12 x 24 Floor Tile
(11 11/16" x 23 7/16")
(29.65 cm x 59.50 cm)
Pieces Per Carton: 5
SQFT: 9.70
  12" x 24" Floor Tile
Random Linear Mosaic
(11 5/8" x 23 1/4" Sheet)
(29.59 cm x 59.00 cm Sheet)
Pieces Per Carton: 4
SQFT: 7.76
Available in DL25, DL26 and DL27 only.
  Random Linear Mosaic
1 x 1 3D Mosaic
(11 11/16" x 11 11/16" Sheet)
(29.65 cm x 29.65 cm Sheet)
Pieces Per Carton: 4
SQFT: 3.88
Available in DL28 only.
  1" x 1" 3D Mosaic
Description   Shape Number Size Shape
Bullnose   S-43F9 3 x 24 Bullnose S-43F9 - 3" x 24"
Cove Base   S-36C9T 6 x 12 Cove Base S-36C9T - 6" x 12"
Cove Base Outcorner   SC-36C9T 1 x 6 Cove Base Outcorner SC-36C9T - 1" x 6"


  • Floor bullnose and cove base trim are intended to coordinate with floor tile in the standard 90-degree installation position.