Delegate ™ ColorBody™ Porcelain
This state-of-the-art digital printing process produces realistic color, detail and veining that is unique on every single tile, for a look that's virtually indistinguishable from natural stone. Click here to explore the benefits of Reveal Imaging.
TruEdge products mean each tile is rectified and modular, which allows for the use of smaller grout joints and even more design flexibility.
Indicates the use of pre-consumer recycled material content in a product.
Indicates product is certified by the Porcelain Tile Certification Agency. Daltile is committed to providing only the highest quality porcelain products. Every porcelain product we offer has been certified - or is in the process of being certified - by the PTCA.
Roll over to zoom product
Photo features Delegate™ Black 1 x 1 3D mosaic on the wall.
Random Linear Mosaic
1 x 1 3D Mosaic
• TECTONIC MOVEMENT
-- Compressed slate visual in four stately shades: off white, light grey, dark grey and black
-- The diagonal movement of slate in durable ColorBody™ porcelain tile
• ELEVATED FLEXIBILITY
-- Two floor tile sizes plus a 20 x 40 tile paver in 2cm thickness
-- Rectified edges for smaller grout joints
-- Random linear mosaic, 3D mosaic and trim package available
Since there are variations in all fired ceramic and natural products, tile and trim supplied for your particular installation may not match samples. Final confirmation should be made from actual tiles and trim prior to installation. Manufactured in accordance with ANSI A137.1 standards.
Not for use on ramps. Water, oil, grease, improper drainage and certain footwear can create slippery conditions. Floor applications expected to be exposed to these conditions require extra caution in product selection.
Special consideration must be given when installing tiles greater than 15 inches. Please click here for more information.
Special care should be taken when grouting with dark pigmented colors. A grout release is recommended to prevent finely powdered pigments from lodging in the pores of the surface. Use of a latex modified thin-set is recommended for installation.
*Available in 2cm thickness in 20 x 40 size.
|Floor & Mosaic||> .42||< 0.5%||> 300 lbs.||8.0||Resistant||N/A|
|Paver||> .42||< 0.5%||> 1000 lbs.||8.0||Resistant||N/A|
A DCOF value of > 0.42 is the standard for tiles specified for level interior spaces expected to be walked upon when wet, as stated in ANSI A137.1-2012, Section 9.6. For more information about DCOF and the DCOF AcuTest™, click here or visit the Tile Council of North America's website: www.tcnatile.com.
|Target DCOF wet||Suitable|
|Dry & Level - Interior Floor||n/a|
|Wet & Level - Interior Floor||≥ 0.42|
|Shower Floors (Residential or Light Commercial)||≥ 0.42|
|Exterior Floor Applications (including pool decking & other wet areas with minimal footwear)||≥ 0.60||*|
|Ramps & Inclines||≥ 0.65|
Suitable for exterior applications in freezing and non-freezing climates, when proper installation methods are followed.
1 x 1 3D mosaic suitable for wall applications only.
* 20 x 40 2cm paver tile only
|20 x 40 Paver Tile||
(19 1/2" x 39 3/16")
(49.50 cm x 99.50 cm)
Pieces Per Carton: 1
Available in DL26 and DL27 only.
|24 x 24 Floor Tile||
(23 7/16" x 23 7/16")
(59.50 cm x 59.50 cm)
Pieces Per Carton: 3
|12 x 24 Floor Tile||
(11 11/16" x 23 7/16")
(29.65 cm x 59.50 cm)
Pieces Per Carton: 5
|Random Linear Mosaic||
(11 5/8" x 23 1/4" Sheet)
(29.59 cm x 59.00 cm Sheet)
Pieces Per Carton: 4
Available in DL25, DL26 and DL27 only.
|1 x 1 3D Mosaic||
(11 11/16" x 11 11/16" Sheet)
(29.65 cm x 29.65 cm Sheet)
Pieces Per Carton: 4
Available in DL28 only.
|Bullnose||S-43F9||3 x 24|
|Cove Base||S-36C9T||6 x 12|
|Cove Base Outcorner||SC-36C9T||1 x 6|
Floor bullnose and cove base trim are intended to coordinate with floor tile in the standard 90-degree installation position.