Anchorage ™ ColorBody™ Porcelain
TruEdge products mean each tile is rectified and modular, which allows for the use of smaller grout joints and even more design flexibility.
Indicates product is certified by the Porcelain Tile Certification Agency. Daltile is committed to providing only the highest quality porcelain products. Every porcelain product we offer has been certified - or is in the process of being certified - by the PTCA.
Roll over to zoom product
Photo features Anchorage™ Beige 12 x 12 and Medium Grey 12 x 12 on the floor and Brickwork™ Alcove 4 x 8 on the wall.
Floor Tile - Unpolished
Floor Tile - Polished
• DURABLE CONSTRUCTION
-- Crafted from premium double-load ColorBody™ porcelain
-- Perfect for high-traffic spaces
• RELIABLE VERSATILITY
-- Featured in three contemporary sizes and seven neutral hues
-- Available in both polished and unpolished finishes
Since there are variations in all fired ceramic and natural products, tile and trim supplied for your particular installation may not match samples. Final confirmation should be made from actual tiles and trim prior to installation. Manufactured in accordance with ANSI A137.1 standards.
Not for use on ramps. Water, oil, grease, improper drainage and certain footwear can create slippery conditions. Floor applications expected to be exposed to these conditions require extra caution in product selection.
Manufacturer Advisory: All tile is measured by the DCOF AcuTest™ method. Tiles with DCOF values <0.42 are not recommended for use in areas with wet or slippery conditions. For more information, see ANSI standard A137.1 section 220.127.116.11.10, available at www.tileusa.com.
Special care should be taken when grouting with dark pigmented colors. A grout release is recommended to prevent finely powdered pigments from lodging in the pores of the surface. Use of a latex modified thin-set is recommended for installation.
|> .42||< 0.5%||> 275 lbs.||8.0||Resistant||N/A|
A DCOF value of > 0.42 is the standard for tiles specified for level interior spaces expected to be walked upon when wet, as stated in ANSI A137.1-2012, Section 9.6. For more information about DCOF and the DCOF AcuTest™, click here or visit the Tile Council of North America's website: www.tcnatile.com.
|Target DCOF wet||Suitable|
|Dry & Level - Interior Floor||n/a|
|Wet & Level - Interior Floor||≥ 0.42||*|
|Shower Floors (Residential or Light Commercial)||≥ 0.42|
|Exterior Floor Applications (including pool decking & other wet areas with minimal footwear)||≥ 0.60|
|Ramps & Inclines||≥ 0.65|
Suitable for exterior applications in freezing and non-freezing climates, when proper installation methods are followed.
* Unpolished only
|24 x 24 Floor Tile||
(23 7/16" x 23 7/16")
(59.44 cm x 59.44 cm)
Pieces Per Carton: 4
|12 x 24 Floor Tile||
(11 5/8" x 23 7/16")
(29.56 cm x 59.44 cm)
Pieces Per Carton: 8
|12 x 12 Floor Tile||
(11 5/8" x 11 5/8")
(29.56 cm x 29.56 cm)
Pieces Per Carton: 11
|Bullnose||S-43C9||3 x 12|
|Cove Base||S-36C9T||6 x 12|
|Cove Base Outcorner||SC-36C9T||1 x 6|
Floor bullnose and cove base trim are intended to coordinate with floor tile in the standard 90-degree installation position.