Anchorage ™ ColorBody™ Porcelain

Tru-Edge
Tru-Edge

TruEdge products mean each tile is rectified and modular, which allows for the use of smaller grout joints and even more design flexibility.

Certified Porcelain
Certified Porcelain

Indicates product is certified by the Porcelain Tile Certification Agency. Daltile is committed to providing only the highest quality porcelain products. Every porcelain product we offer has been certified - or is in the process of being certified - by the PTCA.

Product Image

Roll over to zoom product

Photo features Anchorage™ Beige 12 x 12 and Medium Grey 12 x 12 on the floor and Brickwork™ Alcove 4 x 8 on the wall.



 
Revive modern minimalism with the Anchorage™ collection. The versatility of the collection’s neutral palette lies in its understated shade variation, guaranteeing that your décor and accent choices always stand out. Delivering a crisp, clean look in both polished and unpolished finishes, Anchorage promises pristine style for the ages.

• DURABLE CONSTRUCTION
-- Crafted from premium double-load ColorBody™ porcelain
-- Perfect for high-traffic spaces

• RELIABLE VERSATILITY
-- Featured in three contemporary sizes and seven neutral hues
-- Available in both polished and unpolished finishes

Notes:

  • Since there are variations in all fired ceramic and natural products, tile and trim supplied for your particular installation may not match samples. Final confirmation should be made from actual tiles and trim prior to installation. Manufactured in accordance with ANSI A137.1 standards.

  • Not for use on ramps. Water, oil, grease, improper drainage and certain footwear can create slippery conditions. Floor applications expected to be exposed to these conditions require extra caution in product selection.

  • Manufacturer Advisory: All tile is measured by the DCOF AcuTest™ method. Tiles with DCOF values <0.42 are not recommended for use in areas with wet or slippery conditions. For more information, see ANSI standard A137.1 section 6.2.2.1.10, available at www.tileusa.com.

  • Special care should be taken when grouting with dark pigmented colors. A grout release is recommended to prevent finely powdered pigments from lodging in the pores of the surface. Use of a latex modified thin-set is recommended for installation.

Tile Thickness:
3/8"
Minimum
Grout Joint
Recommendation:
1/8" (3/16" when installing tile with a length 15" or greater in a staggered brick-joint pattern; overlap should not exceed 33%)
Shade Variation:
Medium (V2)
  D.C.O.F. Moisture Breaking   Chemical Abrasion
Wet Absorption Strength MOH's Resistance Resistance
    > .42 < 0.5%  > 275 lbs. 8.0 Resistant N/A

A DCOF value of > 0.42 is the standard for tiles specified for level interior spaces expected to be walked upon when wet, as stated in ANSI A137.1-2012, Section 9.6. For more information about DCOF and the DCOF AcuTest™, click here or visit the Tile Council of North America's website: www.tcnatile.com.

Floor Applications
Target DCOF wet Suitable
Dry & Level - Interior Floor n/a  
Wet & Level - Interior Floor ≥ 0.42   *
Shower Floors (Residential or Light Commercial) ≥ 0.42  
Exterior Floor Applications (including pool decking & other wet areas with minimal footwear) ≥ 0.60  
Ramps & Inclines ≥ 0.65  
Other Applications
Suitable
Walls/Backsplashes  
Countertops  
Pool Linings  

Notes:

  • Suitable for exterior applications in freezing and non-freezing climates, when proper installation methods are followed.

  • * Unpolished only

Size     Shape
24 x 24 Floor Tile
(23 7/16" x 23 7/16")
(59.44 cm x 59.44 cm)
Pieces Per Carton: 4
SQFT: 15.20
 
  24" x 24" Floor Tile
12 x 24 Floor Tile
(11 5/8" x 23 7/16")
(29.56 cm x 59.44 cm)
Pieces Per Carton: 8
SQFT: 15.12
 
  12" x 24" Floor Tile
12 x 12 Floor Tile
(11 5/8" x 11 5/8")
(29.56 cm x 29.56 cm)
Pieces Per Carton: 11
SQFT: 10.34
 
  12" x 12" Floor Tile
Description   Shape Number Size Shape
Bullnose   S-43C9 3 x 12 Bullnose S-43C9 - 3" x 12"
Cove Base   S-36C9T 6 x 12 Cove Base S-36C9T - 6" x 12"
Cove Base Outcorner   SC-36C9T 1 x 6 Cove Base Outcorner SC-36C9T - 1" x 6"

Notes:

  • Floor bullnose and cove base trim are intended to coordinate with floor tile in the standard 90-degree installation position.