Quarry Tile Quarry
When your project goals require sourcing of materials made in the United States, look for this symbol to help you determine which of our product lines help you meet that standard. Icon indicates that all or select items within a series are made in the U.S.A.
Indicates products suitable for exterior applications.
Indicates the use of pre-consumer recycled material content in a product.
Roll over to zoom product
Red Blaze (1) 0Q40
Manufacturing Plant: Lewisport, KY
Numbers in ( ) indicate price group. No. (1) is the least expensive.
|Non-Abrasive||> 0.42||<3.0%||>350 lbs||7||Resistant||N/A|
|Abrasive||> 0.60||<3.0%||>350 lbs||7||N/A||N/A|
A DCOF value of > 0.42 is the standard for tiles specified for level interior spaces expected to be walked upon when wet, as stated in ANSI A137.1-2012, Section 9.6. For more information about DCOF and the DCOF AcuTest™, click here or visit the Tile Council of North America's website: www.tcnatile.com.
|Target DCOF wet||Suitable|
|Dry & Level - Interior||n/a|
|Wet & Level - Interior||≥ 0.42|
|Commercial Dining Areas||≥ 0.50|
|Exterior Applications; Pool Decking & Other Wet Areas with Minimal Footwear||≥ 0.60||*|
|Covered Exterior||≥ 0.60||*|
|Subject to Oils||≥ 0.60|
|Ramps & Inclines||≥ 0.65|
Suitable for exterior floors and walls in freezing and non-freezing climates when proper installation methods are followed.
We do not recommend light colored quarry tile in commercial kitchens unless properly sealed. It is necessary to follow the proper procedures and recommendations from the grout and maintenance products manufacturers.
Suitable for use on exterior patios, including pool decks and ramps when ordered with abrasive.
*Abrasive surface only
|4 x 8 Field Tile||
(10.2 cm x 20.3 cm)
Pieces Per Carton: 50
(0Q40, 0Q41 only.)
|6 x 6 Field Tile||
(15.2 cm x 15.2 cm)
Pieces Per Carton: 44
All colors are available in abrasive grain 6" x 6".
Only 0Q40 and 0Q41 are available in abrasive grain in 4" x 8".
|Bullnose||Q-1485||4 x 8|
|Bullnose||Q-1665||6 x 6|
|Bullnose Corner||QCRL-1485||4 x 8|
|Bullnose Corner||QCRL-1665||6 x 6|
|Cove||Q-3565||5 x 6|
|Cove Corner||QCRL-3565||5 x 6|
|Inside Cove Corner||QB-3565||1 x 5|
|Cove Corner||QC-3565||1 x 5|
Floor bullnose trim is intended to coordinate with floor tile in the standard 90-degree installation position.