Quarry Tile Quarry
When your project goals require sourcing of materials made in the United States, look for this symbol to help you determine which of our product lines help you meet that standard. Icon indicates that all or select items within a series are made in the U.S.A.
Daltile is proud to champion innovation within the industry, as one of the first to support Green Squared, a new standard for sustainable projects. Most of our products have already achieved Green Squared Certification and meet the industry’s toughest green standard to date.
Roll over to zoom product
Red Blaze (1) 0Q40
Manufacturing Plant: Lewisport, KY
Numbers in ( ) indicate price group. No. (1) is the least expensive.
|> 0.42||> 0.6||> 0.8||<3.0%||>350 lbs||7||Resistant||N/A|
|Abrasive||> 0.42||> 0.9||> 0.9||<3.0%||>350 lbs||7||N/A||N/A|
Dynamic C.O.F. (Wet) value as measured by the DCOF AcuTestTM helps to assess a products suitability for a commercial environment. Read information on D.C.O.F.
|Floors/Patios (Covered & Uncovered)|
|Floors||Walls||Countertops||Exterior Patios||Exterior Pool Decks|
Suitable for exterior floors and walls in freezing and non-freezing climates when proper installation methods are followed. Suitable for industrial installations requiring high-compressive strength. Special care should be taken when grouting with dark pigmented colors. A grout release is recommended to prevent finely powdered pigments from lodging in the pores of the tile surface.
We do not recommend light colored quarry tile in commercial kitchens unless properly sealed. It is necessary to follow the proper procedures and recommendations from the grout and maintenance products manufacturers.
Suitable for use on exterior patios, including pool decks and ramps when ordered with abrasive.
|4 x 8 Decorative
(10.2 cm x 20.3 cm)
Pieces Per Carton: 50
(0Q40, 0Q41 only.)
|6 x 6 Field Tile||
(15.2 cm x 15.2 cm)
Pieces Per Carton: 44
All colors are available in abrasive grain 6" x 6".
Only 0Q40 and 0Q41 are available in abrasive grain in 4" x 8".
|Bullnose||Q-1485||4 x 8|
|Bullnose||Q-1665||6 x 6|
|Bullnose Corner||QCRL-1485||4 x 8|
|Bullnose Corner||QCRL-1665||6 x 6|
|Cove||Q-3565||5 x 6|
|Cove Corner||QCRL-3565||5 x 6|
|Inside Cove Corner||QB-3565||1 x 5|
|Cove Corner||QC-3565||1 x 5|
Floor Bullnose trim is intended to coordinate with floor field tile in the standard 90-degree installation position.