Formula ™ ColorBody™ Porcelain
TruEdge products mean each tile is rectified and modular, which allows for the use of smaller grout joints and even more design flexibility.
Indicates the use of pre-consumer recycled material content in a product.
Indicates product is certified by the Porcelain Tile Certification Agency. Daltile is committed to providing only the highest quality porcelain products. Every porcelain product we offer has been certified - or is in the process of being certified - by the PTCA.
Roll over to zoom product
Photo features Theorem Ivory in 12 x 24 on the floor.
• INNOVATION THAT ENDURES
- Advanced double-layered technology allows optimum durability
- Even high-traffic areas can achieve exceptional style with this contemporary yet timeless look
• ENDLESS OPTIONS FOR INFINITE STYLE
- Available in seven versatile colors in polished or unpolished finishes
- Ideal for commercial, institutional or residential floor and wall applications
- Offered in 12 x 24, 24 x 24 and 24 x 48 sizes with coordinating trim
Special care should be taken when grouting with dark pigmented colors. A grout release is recommended to prevent finely powdered pigments from lodging in the pores of the surface. Use of a latex modified thin-set is recommended for installation.
Since there are variations in all fired ceramic products, tile and trim supplied for your particular installation may not match these samples. Final color selection should be made from actual tiles and trim and not from tile samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards.
Water, oil, grease, etc. create slippery conditions. Floor applications with exposure to these conditions require extra caution in product selection. Not for use on ramps.
|Unpolished||> .42||< 0.5%||> 300 lbs.||8.0||Resistant||N/A|
|Polished||> .42||< 0.5%||> 300 lbs.||8.0||Resistant||N/A|
A DCOF value of > 0.42 is the standard for tiles specified for level interior spaces expected to be walked upon when wet, as stated in ANSI A137.1-2012, Section 9.6. For more information about DCOF and the DCOF AcuTest™, click here or visit the Tile Council of North America's website: www.tcnatile.com.
|Target DCOF wet||Suitable|
|Dry & Level - Interior||n/a|
|Wet & Level - Interior||≥ 0.42||*|
|Exterior Applications; Pool Decking & Other Wet Areas with Minimal Footwear||≥ 0.60|
|Ramps & Inclines||≥ 0.65|
* Unpolished surface only
Suitable for exterior applications in freezing and non-freezing climates when proper installation methods are followed.
Polished surface is suitable only for dry and level floor applications.
|24 x 48 Field Tile||
(23 3/8" x 47")
(59.44 cm x 119.30 cm)
Pieces Per Carton: 2
|24 x 24 Field Tile||
(23 3/8" x 23 3/8")
(59.44 cm x 59.44 cm)
Pieces Per Carton: 3
|12 x 24 Field Tile||
(11 5/8" x 23 3/8")
(29.56 cm x 59.44 cm)
Pieces Per Carton: 5
Special consideration needs to be given when installing tiles 20" and larger. Please click here for more information.
|Bullnose||S-43F9||3 x 24|
|Cove Base||S-36C9T||6 x 12|
|Cove Base Outcorner||SC-36C9T||1 x 6|
Bullnose, cove base and cove base corner trim are intended to coordinate with floor field tile in the standard 90-degree installation position.
Bullnose available in Polished & Unpolished textures.