Ambassador ™ ColorBody™ Porcelain
TruEdge products mean each tile is rectified and modular, which allows for the use of smaller grout joints and even more design flexibility.
Indicates the use of pre-consumer recycled material content in a product.
Indicates product is certified by the Porcelain Tile Certification Agency. Daltile is committed to providing only the highest quality porcelain products. Every porcelain product we offer has been certified - or is in the process of being certified - by the PTCA.
Roll over to zoom product
Photo features Global Grey 24 x 48 field tile on the floor and 12 x 24 field tile on the desk front.
Field Tile - Unpolished & Light Polished
Random Linear Mosaic
• MODERN AND ELEGANT FLAIR
- Elegant stone look available in four colors featuring a high level of veining and distinctive patterns
- Three modern sizes including 24 x 24, 12 x 24 and 24 x 48
• HEIGHTENED VERSATILITY
- 12 x 24 available in Light Polished and Unpolished finishes
- Unique, three-dimensional mosaic adds to the dynamics of this series
Special care should be taken when grouting with dark pigmented colors. A grout release is recommended to prevent finely powdered pigments from lodging in the pores of the surface. Use of a latex modified thin-set is recommended for installation.
Strong random shading enhances the natural beauty of this product. To achieve optimal results, tile should be selected from multiple cartons and shading arrangement planned prior to installation.
Since there are variations in all fired ceramic products, tile and trim supplied for your particular installation may not match these samples. Final color selection should be made from actual tiles and trim and not from tile samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards.
|> .42||< 0.5%||> 300 lbs.||8.0||Resistant||N/A|
A DCOF value of > 0.42 is the standard for tiles specified for level interior spaces expected to be walked upon when wet, as stated in ANSI A137.1-2012, Section 9.6. For more information about DCOF and the DCOF AcuTest™, click here or visit the Tile Council of North America's website: www.tcnatile.com.
|Target DCOF wet||Suitable|
|Dry & Level - Interior||n/a|
|Wet & Level - Interior||≥ 0.42||*|
|Exterior Applications; Pool Decking & Other Wet Areas with Minimal Footwear||≥ 0.60|
|Ramps & Inclines||≥ 0.65|
Suitable for exterior applications in freezing and non-freezing climates when proper installation methods are followed.
Light Polished surface suitable for ‘Dry & Level’ floor applications only
Water, oil, grease, etc. create slippery conditions. Floor applications with exposure to these conditions require extra caution in product selection. Not for use on ramps.
* Unpolished surface only.
|24 x 48 Field Tile||
(23 7/16" x 47")
(59.50 cm x 119.30 cm)
Pieces Per Carton: 2
|24 x 24 Field Tile||
(23 7/16" x 23 7/16")
(59.50 cm x 59.50 cm)
Pieces Per Carton: 3
|12 x 24 Field Tile||
(11 11/16" x 23 7/16")
(29.65 cm x 59.50 cm)
Pieces Per Carton: 5
(Unpolished & Light Polished)
|Random Linear Mosaic||
(12" x 24" sheet)
Pieces Per Carton: 4
Special consideration needs to be given when installing tiles 20" and larger. Please click here for more information.
|Bullnose||S-43F9||3 x 24|
|Cove Base||S-36C9T||6 x 12|
|Cove Base Outcorner||SC-36C9T||1 x 6|
Bullnose, cove base and cove base corner trim are intended to coordinate with floor field tile in the standard 90-degree installation position.
Bullnose available in Unpolished surface only.