Dignitary ™ ColorBody™ Porcelain
TruEdge products mean each tile is rectified and modular, which allows for the use of smaller grout joints and even more design flexibility.
Indicates the use of pre-consumer recycled material content in a product.
Indicates product is certified by the Porcelain Tile Certification Agency. Daltile is committed to providing only the highest quality porcelain products. Every porcelain product we offer has been certified - or is in the process of being certified - by the PTCA.
Roll over to zoom product
Photo features Superior Taupe 24 x 48 on the floor, Superior Taupe 12 x 24 on the left wall, Luminary White 12 x 24 on the right wall, and Superior Taupe Abstract Mosaic on the shower wall.
Field Tile - Unpolished, Light Polished, & Textured
• REIMAGINING A CLASSIC
- Small fossils and veining replicate the look of French limestone that has stood the test of time
- Six rich neutral colors appeal to contemporary tastes
- 2 cm thick tile available in 24 x 24 size and three colors
• AGELESS BEAUTY ANYWHERE
- Three finishes offer the ability to stretch designs from floors to walls, indoors, and out
- Three large-format sizes plus an abstract mosaic all provide dimensional depth
Special care should be taken when grouting with dark pigmented colors. A grout release is recommended to prevent finely powdered pigments from lodging in the pores of the surface. Use of a latex modified thin-set is recommended for installation
Since there are variations in all fired ceramic products, tile and trim supplied for your particular installation may not match these samples. Final color selection should be made from actual tiles and trim and not from tile samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards.
|3/8 in. Thickness||> .42||< 0.5%||> 300 lbs.||8.0||Resistant||N/A|
A DCOF value of > 0.42 is the standard for tiles specified for level interior spaces expected to be walked upon when wet, as stated in ANSI A137.1-2012, Section 9.6. For more information about DCOF and the DCOF AcuTest™, click here or visit the Tile Council of North America's website: www.tcnatile.com.
|Target DCOF wet||Suitable|
|Dry & Level - Interior||n/a|
|Wet & Level - Interior||≥ 0.42||*|
|Exterior Applications; Pool Decking & Other Wet Areas with Minimal Footwear||≥ 0.60||†|
|Ramps & Inclines||≥ 0.65|
Suitable for exterior applications in freezing and non-freezing climates when proper installation methods are followed.
Light Polished surface is suitable only for dry and level floor applications.
† Textured surface only.
^ Mosaics only.
Water, oil, grease, etc. create slippery conditions. Floor applications with exposure to these conditions require extra caution in product selection. Not for use on ramps.
* Unpolished and textured surfaces only.
|24 x 48 Field Tile||
(23 7/16" x 47")
(59.50 cm x 119.30 cm)
Pieces Per Carton: 2
|24 x 24 Field Tile||
(23 7/16" x 23 7/16")
(59.50 cm x 59.50 cm)
Pieces Per Carton: 3
Available with 2cm thickness in DR07, DR08 & DR09 only. 2cm thickness - 7.76 sq. ft. per carton; 2 pieces per carton. (Unpolished)
|12 x 24 Field Tile||
(11 11/16" x 23 7/16")
(29.65 cm x 59.50 cm)
Pieces Per Carton: 5
(Unpolished, Light Polished, Textured)
(12" x 12" sheet)
Pieces Per Carton: 4
Special consideration needs to be given when installing tiles 20" and larger. Please click here for more information.
|Bullnose||S-43F9||3 x 24|
|Cove Base||S-36C9T||6 x 12|
|Cove Base Outcorner||SC-36C9T||1 x 6|
Bullnose, cove base and cove base corner trim are intended to coordinate with floor field tile in the standard 90-degree installation position.
Bullnose available in Unpolished surface only.