Quarry Textures ™ Quarry
When your project goals require sourcing of materials made in the United States, look for this symbol to help you determine which of our product lines help you meet that standard. Icon indicates that all or select items within a series are made in the U.S.A.
Indicates products suitable for exterior applications.
Indicates the use of pre-consumer recycled material content in a product.
Roll over to zoom product
Diablo Red (1) 0T01
Manufacturing Plant: Fayette, AL
Special care should be taken when grouting with dark pigmented colors. A grout release is recommended to prevent finely powdered pigments from lodging in the pores of the tile surface.
|Non-Abrasive||> 0.42||<3.0%||>400 lbs||7||resistant||N/A|
|Abrasive||> 0.42||< 3.0%||>400 lbs||7||N/A||N/A|
A DCOF value of > 0.42 is the standard for tiles specified for level interior spaces expected to be walked upon when wet, as stated in ANSI A137.1-2012, Section 9.6. For more information about DCOF and the DCOF AcuTest™, click here or visit the Tile Council of North America's website: www.tcnatile.com.
|Target DCOF wet||Suitable|
|Dry & Level - Interior||n/a|
|Wet & Level - Interior||≥ 0.42|
|Commercial Dining Areas||≥ 0.50|
|Exterior Applications; Pool Decking & Other Wet Areas with Minimal Footwear||≥ 0.60||*|
|Covered Exterior||≥ 0.60||*|
|Ramps & Inclines||≥ 0.65|
|Subject to Oils||≥ 0.60|
Suitable for exterior applications in freezing and non-freezing climates when proper installation methods are followed.
We do not recommend light colored quarry tile in commercial kitchens unless properly sealed. It is necessary to follow the proper procedures and recommendations from the grout and maintenance products manufacturers.
Suitable for use on ramps when ordered with abrasive.
*Abrasive surface only
|4 x 8 Field Tile||
(10.2 cm x 20.3 cm)
Pieces Per Carton: 50
|6 x 6 Field Tile||
(15.2 cm x 15.2 cm)
Pieces Per Carton: 44
|8 x 8 Field Tile||
(20.3 cm x 20.3 cm)
Pieces Per Carton: 25
Abrasive grain available in 6" X 6" and 8" X 8" sizes in 0T01, 0T03, 0T05, 0T08, 0T09 and OT11 colors only.
|Bullnose||Q-1665||6 x 6|
|Bullnose||Q-1885||8 x 8|
|Bullnose Corner||QCRL-1665||6 x 6|
|Bullnose Corner||QCRL-1885||8 x 8|
|Cove||Q-3565||5 x 6|
|Cove||Q-3585||5 x 8|
|Cove Corner||QCRL-3565||5 x 6|
|Inside Cove Corner||QB-3565||1 x 5|
Trim QCR-L-3565 not available in T02, T04, and T06; use a coordinating solid color.
Floor bullnose trim is intended to coordinate with floor tile in the standard 90-degree installation position.