Quarry Textures ™ Quarry

Made in the USA
Made in the USA

When your project goals require sourcing of materials made in the United States, look for this symbol to help you determine which of our product lines help you meet that standard. Icon indicates that all or select items within a series are made in the U.S.A.

Exterior Product
Exterior Product

Indicates products suitable for exterior applications.


Indicates the use of pre-consumer recycled material content in a product.

Product Image

Roll over to zoom product

Diablo Red (1) 0T01

Pre-Consumer: 0.0%
Post-Consumer: 0.0%
Manufacturing Plant: Fayette, AL

The unglazed, textured surface makes these pavers naturally stain- and slip-resistant. Available in six rustic color-through choices, Quarry Textures is the perfect choice for both residential and commercial floors.


  • Special care should be taken when grouting with dark pigmented colors. A grout release is recommended to prevent finely powdered pigments from lodging in the pores of the tile surface.

Tile Thickness:
Relative Pricing:
Grout Joint
Shade Variation:
Medium (V2)
  D.C.O.F. Moisture Breaking   Chemical Abrasion
Wet Absorption Strength MOH's Resistance Resistance
  Non-Abrasive  > 0.42 <3.0%  >400 lbs 7 resistant N/A
  Abrasive  > 0.42 < 3.0%  >400 lbs 7 N/A N/A

A DCOF value of > 0.42 is the new standard for tiles specified for commercial application in standard A137.1-2012, Section 9.6. It replaces the SCOF value of > 0.60 referenced in ASTM C1028. For more information on the correlation between the two values and about the DCOF AcuTest, click here for more information or visit the Tile Council of North America's website: www.tcnatile.com

Floor Applications
Target DCOF wet Suitable
Dry & Level n/a  
Wet & Level ≥ 0.42  
Commercial Dining Areas ≥ 0.50  
Pool Decking & other wet areas with minimal footwear ≥ 0.60   *
Covered Exterior ≥ 0.60   *
Interior Ramps, Inclines and Uncovered Exterior ≥ 0.65  
Subject to Oils ≥ 0.60  
Other Applications


  • Suitable for exterior applications in freezing and non-freezing climates when proper installation methods are followed.

  • We do not recommend light colored quarry tile in commercial kitchens unless properly sealed. It is necessary to follow the proper procedures and recommendations from the grout and maintenance products manufacturers.

  • Suitable for use on ramps when ordered with abrasive.

  • *Abrasive surface only

Size     Shape
4 x 8 Field Tile
(10.2 cm x 20.3 cm)
Pieces Per Carton: 50
SQFT: 10.76
  4" x 8" Field Tile
6 x 6 Field Tile
(15.2 cm x 15.2 cm)
Pieces Per Carton: 44
SQFT: 11.00
  6" x 6"  Field Tile
8 x 8 Field Tile
(20.3 cm x 20.3 cm)
Pieces Per Carton: 25
SQFT: 11.00
  8" x 8" Field Tile


  • Abrasive grain available in 6" X 6" and 8" X 8" sizes in 0T01, 0T03, 0T05, 0T08, 0T09 and OT11 colors only.

Description   Shape Number Size Shape
Bullnose Made in the USA   Q-1665 6 x 6 Bullnose Q-1665 - 6" x 6"
Bullnose   Q-1885 8 x 8 Bullnose Q-1885 - 8" x 8"
Bullnose Corner Made in the USA   QCRL-1665 6 x 6 Bullnose Corner QCRL-1665 - 6" x 6"
Bullnose Corner   QCRL-1885 8 x 8 Bullnose Corner QCRL-1885 - 8" x 8"
Cove   Q-3565 5 x 6 Cove Q-3565 - 5" x 6"
Cove   Q-3585 5 x 8 Cove Q-3585 - 5" x 8"
Cove Corner Made in the USA   QCRL-3565 5 x 6 Cove Corner QCRL-3565 - 5" x 6"
Inside Cove Corner Made in the USA   QB-3565 1 x 5 Inside Cove Corner QB-3565 - 1" x 5"


  • Trim QCR-L-3565 not available in T02, T04, and T06; use a coordinating solid color.

  • Floor bullnose trim is intended to coordinate with floor field tile in the standard 90-degree installation position.