River Marble ™ ColorBody™ Porcelain
TruEdge products mean each tile is rectified and modular, which allows for the use of smaller grout joints and even more design flexibility.
Indicates product is certified by the Porcelain Tile Certification Agency. Daltile is committed to providing only the highest quality porcelain products. Every porcelain product we offer has been certified - or is in the process of being certified - by the PTCA.
Roll over to zoom product
Photo features Smoky River 12 x 24 field tile on the floor.
• BEAUTIFUL DESIGN
— Captivating marble look with intricate details that project a strong, traditional visual
— Available in five nature-inspired colors and four plank and rectangular sizes
— Matte and polish surfaces inspire a variety of design opportunities
• PERFECT FOR ANY SPACE
— Creates a unique look in any space—from large open areas to luxurious bathrooms and entryways
— Affordable, high-end stone look
Special care should be taken when grouting with dark pigmented colors. A grout release is recommended to prevent finely powdered pigments from lodging in the pores of the surface. Use of a latex modified thin-set is recommended for installation.
Strong random shading enhances the natural beauty of this product. To achieve optimal results, tile should be selected from multiple cartons and shading arrangement planned prior to installation.
Since there are variations in all fired products, tile and trim supplied for your particular installation may not match these samples. Final color selection should be made from actual tiles and trim and not from tile samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards.
|Unpolished||> .42||< 0.5%||> 400 lbs.||8.0||Resistant||N/A|
|Polished||< .42||< 0.5%||> 400 lbs.||5.0||Resistant||N/A|
A DCOF value of > 0.42 is the standard for tiles specified for level interior spaces expected to be walked upon when wet, as stated in ANSI A137.1-2012, Section 9.6. For more information about DCOF and the DCOF AcuTest™, click here or visit the Tile Council of North America's website: www.tcnatile.com.
- These tiles have a dynamic coefficient of friction < 0.42 as measured by the DCOF Acutest method. Tiles with DCOF values < 0.42 are not recommended for use in areas with wet or slippery conditions. For more information, see ANSI standard A137.1 section 22.214.171.124.10, available at www.tileusa.com.
- Water, oil, grease, etc. create slippery conditions. Floor applicatons with exposure to these conditions require extra caution in product selection. Not for use on ramps.
- For addtional information, refer to Factors to Consider.
- Since there is a shade variation on all natural products, the tile and trim supplied for your particular installation may not match these samples. Final selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards.
|Target DCOF wet||Suitable|
|Dry & Level - Interior||n/a|
|Wet & Level - Interior||≥ 0.42|
|Commercial Dining Areas||≥ 0.50|
|Exterior Applications; Pool Decking & Other Wet Areas with Minimal Footwear||≥ 0.60|
|Covered Exterior||≥ 0.60|
|Ramps & Inclines||≥ 0.65|
Floor tile suitable for exterior applications in freezing and non -freezing climates when proper installation methods are followed.
Water, oil, grease, etc. create slippery conditions. Floor applications with exposure to these conditions require extra caution in product selection. Not for use on ramps.
Polished surface is suitable only for Dry & Level floor applications.
|12 x 36 Field Tile||
(11 5/8" x 35 3/16")
(29.56 cm x 89.32 cm)
Pieces Per Carton: 4
|8 x 36 Field Tile||
(7 5/8" x 35 3/16")
(19.60 cm x 89.32 cm)
Pieces Per Carton: 6
|12 x 24 Field Tile||
(11 5/8" x 23 3/8")
(29.56 cm x 59.44 cm)
Pieces Per Carton: 8
|6 x 24 Field Tile||
(5 5/8" x 23 3/8")
(14.62 cm x 59.44 cm)
Pieces Per Carton: 11
Special consideration needs to be given when installing tiles 20" and larger. Please click here for more information.
|Bullnose||S-43C9||3 x 12|
|Cove Base||P-36C9T||6 x 12|
|Cove Base Outcorner||PC-36C9T||1 x 6|
Cove base trim is clay body ceramic and is recommended for exterior applications in non-freezing climates only.
Floor bullnose and cove base trim are intended to coordinate with floor field tile in the standard 90-degree installation position.