Porcealto™ ColorBody™ Porcelain
Indicates products suitable for exterior applications.
Indicates the use of pre-consumer recycled material content in a product.
Indicates product is certified by the Porcelain Tile Certification Agency. Daltile is committed to providing only the highest quality porcelain products. Every porcelain product we offer has been certified - or is in the process of being certified - by the PTCA.
Roll over to zoom product
Photo features Porcealto in Azzurite 4 x 4 and Bianco Ghiaccio 12 x 12 on wall. Floor features Azzurite and Bianco Ghiaccio 12 x 12 and Urban Metals 2 x 12 Spiral Deco in Bronze.
Graniti Field Tile
Solids Field Tile
**A Cross Grid (skid-resistant) surface finish is available by special order, in 8" x 8" only in select colors.
SP = Denotes Special Order.
Numbers in ( ) indicate price group. (1) is least expensive.
Check chart for size and surface availability.
Special care should be taken when grouting with dark pigmented colors. A grout release is recommended to prevent finely powdered pigments from lodging in the pores of the tile surface.
Use of a latex modified thin-set is recommended for installation. Not for use on ramps.
Since there are variations in all fired ceramic products, the tile and trim supplied for your particular installation may not match these samples. Final color selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards.
|Unpolished||> 0.42||<0.5%||>478 lbs||7.5||Resistant||N/A|
|Textured||> 0.42||<0.5%||>520 lbs.||8||Resistant||N/A|
A DCOF value of > 0.42 is the new standard for tiles specified for commercial application in standard A137.1-2012, Section 9.6. It replaces the SCOF value of > 0.60 referenced in ASTM C1028. For more information on the correlation between the two values and about the DCOF AcuTest, click here for more information or visit the Tile Council of North America's website: www.tcnatile.com
- These tiles have a dynamic coefficient of friction less than 0.42 as measured by the DCOF AcutestTM method. Tiles with DCOF Acutest values less than .42 are not recommended for use in areas with wet or slippery conditions. If such tiles are used as a walking surface where water, ice, oil, grease and/or other substances are present, such a condition could cause a reduction in foot traction and become unexpectedly slippery resulting in a fall and personal injury. See ANSI standard A137.1 section 18.104.22.168.10, available at www.tcnatile.com/section22.214.171.124.10.html.
- Water, oil, grease, etc. create slippery conditions. Floor applicatons with exposure to these conditions require extra caution in product selection. Not for use on ramps.
- For addtional information, refer to Factors to Consider.
- Since there is a shade variation on all natural products, the tile and trim supplied for your particular installation may not match these samples. Final selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards.
|Floors/Patios (Covered & Uncovered)|
|Floors||Walls||Countertops||Exterior Patios||Exterior Pool Decks|
Suitable for exterior patios (textured only) and pool decks (textured only) in freezing and non-freezing climates when proper installation methods are followed. All surfaces suitable for exterior walls in freezing and non-freezing climates when proper installation methods are followed.
|8 x 8 Field Tile||
(7 13/16" x 7 13/16")
(18.3 cm x 18.3 cm)
Pieces Per Carton: 30
Available in Graniti only.
|12 x 12 Field Tile||
(11 13/16" x 11 13/16")
(30.0 cm x 30.0 cm)
Pieces Per Carton: 15
Available in Unpolished Solids and Grani, as well as all Graniti. Special Order available for Polished, except in CD01 White.
Special Note: Porcealto and Designer Colours Series nominal sizes are not compatible.
|Bullnose||S-4489||4 x 8|
|Bullnose Corner||SCR/SCL-4489||4 x 8|
|Cove Base||S-3689T||6 x 8|
|Inside Cove Corner||SB-3689T||1 x 6|
|Outside Cove Corner||SC-3689T||1 x 6|
|Stair Tread||S-6CC6||12 x 12|
|88Grid||N/A||8 x 8|
|Bullnose||S-44C9||4 x 12|
|Cove Base||S-36C9T||6 x 12|
Stair Tread S-6CC6 is available by special order only in Bianco Alpi, Beige, Rosa Antico, Pepe Grigio and Grigio Scuro.
Cove Base and Floor Bullnose trim are intended to coordinate with floor field tile in the standard 90-degree installation position.