Danzare ™ Ceramic Floor & Wall

Exterior Product
Exterior Product

Indicates products suitable for exterior applications.

Product Image

Roll over to zoom product

Almond DZ01



Origin: United States

 
Tile Thickness:
5/16"
Relative Pricing:
Low
Minimum
Grout Joint
Recommendation:
3/16"
Shade Variation:
Medium (V2)
  D.C.O.F. Moisture Breaking   Chemical Abrasion
Wet Absorption Strength MOH's Resistance Resistance
    < .42 3.0 - 4.0  > 250 lbs. 7.0 Resistant 3

A DCOF value of > 0.42 is the new standard for tiles specified for commercial application in standard A137.1-2012, Section 9.6. It replaces the SCOF value of > 0.60 referenced in ASTM C1028. For more information on the correlation between the two values and about the DCOF AcuTest, click here for more information or visit the Tile Council of North America's website: www.tcnatile.com

Manufacturers Warning:

  • These tiles have a dynamic coefficient of friction less than 0.42 as measured by the DCOF AcutestTM method. Tiles with DCOF Acutest values less than .42 are not recommended for use in areas with wet or slippery conditions. If such tiles are used as a walking surface where water, ice, oil, grease and/or other substances are present, such a condition could cause a reduction in foot traction and become unexpectedly slippery resulting in a fall and personal injury. See ANSI standard A137.1 section 6.2.2.1.10, available at www.tcnatile.com/section6.2.2.1.10.html.
  • Water, oil, grease, etc. create slippery conditions. Floor applicatons with exposure to these conditions require extra caution in product selection. Not for use on ramps.
  • For addtional information, refer to Factors to Consider.
  • Since there is a shade variation on all natural products, the tile and trim supplied for your particular installation may not match these samples. Final selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards.
COMMERCIAL USAGE
APPLICATION INTERIOR EXTERIOR
  Residential Light
Commercial
Commercial Residential Commercial
Floors/Patios (Covered & Uncovered)        
Walls/Backsplashes
Countertops
Pool Decking          
Pool Linings
RESIDENTIAL USAGE
APPLICATION
Floors Walls Countertops Exterior Patios Exterior Pool Decks
F W C

Notes:

  • Suitable for exterior walls in non-freezing climates when proper installation methods are followed.

Size     Shape
12 x 12 Field Tile
Pieces Per Carton: 15
SQFT: 14.55
 
  12" x 12" Field Tile
18 x 18 Field Tile
(17 13/16" x 17 13/16")
(45.25 cm x 45.25 cm)
Pieces Per Carton: 8
SQFT: 17.68
 
  18" x 18" Field Tile
Description   Shape Number Size Shape
Bullnose Made in the USA   S-43C9 3 x 12 Bullnose S-43C9 - 3" x 12"

Notes:

  • Floor Bullnose trim is intended to coordinate with floor field tile in the standard 90-degree installation position.