Avondale ™ Glazed Porcelain
This state-of-the-art digital printing process produces realistic color, detail and veining that is unique on every single tile, for a look that's virtually indistinguishable from natural stone. Click here to explore the benefits of Reveal Imaging.
Indicates products suitable for exterior applications.
Indicates the use of post-consumer recycled material content in a product.
Indicates the use of pre-consumer recycled material content in a product.
Indicates product is certified by the Porcelain Tile Certification Agency. Daltile is committed to providing only the highest quality porcelain products. Every porcelain product we offer has been certified - or is in the process of being certified - by the PTCA.
Roll over to zoom product
Photo features Castle Rock 10 x 14 wall tile with Glass Horizons Arctic Blend 3/4 x Random mosaic as a decorative accent.
Glazed Porcelain Floor Tile
Glazed Ceramic Wall Tile
Glazed Ceramic Mosaics
Stunning in its depth and movement, Avondale from Daltile will transform any space. Neutral colors and softly illuminated tones emulate the warmth of natural limestone. Its deep color tones and moving graphics give it added dimension. Avondale's porcelain floor tile and complementary ceramic wall and mosaic tiles allow for a wealth of design options. Find gorgeous details within the surface as you explore the many facets of Avondale.
• REALISTIC LOOK
-- Realistic graphics and color demonstrate depth and movement to help create a classic visual appeal
-- Emulates a limestone visual with wide graphic variation in three color tones
• COORDINATING FORMATS
-- Coordinating floor, wall, and mosaic tiles offer more design possibilities
• NEUTRAL COLORS
-- Warm color palette easily integrates with any style or design
Use of a latex modified thin-set is recommended for installation.
Since there are variations in all fired ceramic products, tile and trim supplied for your particular installation may not match these samples. Final color selection should be made from actual tiles and trim and not from tile samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards.
|Floor||> .42||< 0.5%||> 275 lbs.||8.0||Resistant||4|
|Wall||< .42||< 20.0%||100 - 230 lbs.||4.0 - 6.5||Resistant||N/A|
|Mosaics||> .42||< 3.0%||> 250 lbs.||8.0||Resistant||4|
A DCOF value of > 0.42 is the new standard for tiles specified for commercial application in standard A137.1-2012, Section 9.6. It replaces the SCOF value of > 0.60 referenced in ASTM C1028. For more information on the correlation between the two values and about the DCOF AcuTest, click here for more information or visit the Tile Council of North America's website: www.tcnatile.com
- These tiles have a dynamic coefficient of friction less than 0.42 as measured by the DCOF AcutestTM method. Tiles with DCOF Acutest values less than .42 are not recommended for use in areas with wet or slippery conditions. If such tiles are used as a walking surface where water, ice, oil, grease and/or other substances are present, such a condition could cause a reduction in foot traction and become unexpectedly slippery resulting in a fall and personal injury. See ANSI standard A137.1 section 22.214.171.124.10, available at www.tcnatile.com/section126.96.36.199.10.html.
- Water, oil, grease, etc. create slippery conditions. Floor applicatons with exposure to these conditions require extra caution in product selection. Not for use on ramps.
- For addtional information, refer to Factors to Consider.
- Since there is a shade variation on all natural products, the tile and trim supplied for your particular installation may not match these samples. Final selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards.
|Target DCOF wet||Tile Texture or
|Dry & Level||n/a||n/a|
|Wet & Level||≥ 0.42||Optional|
|Commercial Dining Areas||≥ 0.50||Optional|
|Pool Decking & other wet areas with minimal footwear||≥ 0.55||Required if tile size is > 3x3|
|Covered Exterior||≥ 0.60||Required if tile size is > 3x3|
|Interior Ramps, Inclines and Uncovered Exterior||≥ 0.65||Required if tile size is > 6x6|
Wall tile is suitable to be used on interior bathroom floors where the floor is not subject to exterior foot traffic, when proper installation methods are followed.
Floor tile suitable for exterior floors (excluding pool decking) in freezing and non-freezing climates when proper installation methods are followed.
Mosaic tile suitable for exterior floors (excluding pool decking) in non-freezing climates when proper installation methods are followed.
Wall tile suitable for exterior walls in non-freezing climates when proper installation methods are followed.
|18 x 18 Field Tile||
(17 3/4" x 17 3/4")
(45.20 cm x 45.20 cm)
Pieces Per Carton: 8
|12 x 24 Field Tile||
(11 11/16" x 23 5/8")
(29.70 cm x 60.00 cm)
Pieces Per Carton: 8
|12 x 12 Field Tile||
(11 13/16" x 11 13/16")
(30.00 cm x 30.00 cm)
Pieces Per Carton: 11
|10 x 14 Wall Tile||
(9 27/32" x 13 31/32")
(25.00 cm x 35.50 cm)
Pieces Per Carton: 15
|2 x 4 Brick-Joint Mosaic||
(11 7/8" x 11 7/8" Sheet)
(30.20 cm x 30.20 cm Sheet)
Pieces Per Carton: 12
|Bullnose||P-43C9||3 x 12|
|Wall Bullnose (10" side)||S-4310||3 x 10|
|Wall Bullnose Corner||SN-4310||3 x 3|
Floor bullnose trim is intended to coordinate with floor field tile in the standard 90-degree installation position.