Cortona ™ Glazed Porcelain
This state-of-the-art digital printing process produces realistic color, detail and veining that is unique on every single tile, for a look that's virtually indistinguishable from natural stone. Click here to explore the benefits of Reveal Imaging.
Indicates products suitable for exterior applications.
Indicates the use of pre-consumer recycled material content in a product.
Indicates product is certified by the Porcelain Tile Certification Agency. Daltile is committed to providing only the highest quality porcelain products. Every porcelain product we offer has been certified - or is in the process of being certified - by the PTCA.
Roll over to zoom product
Photo features Umbrian Hill on the floor in a grid pattern.
Backsplash Design Ideas
Bring the look of rich, Travertine stone into your space. The Cortona Colorbody collection from Daltile has the air of olden Tuscan charm with a captivating and contemporary twist. Where ancient history meets the modern age, this tile reflects the organic beauty of travertine stone, featuring chiseled edges and light surface pitting. Choose from a variety of colors, finishes and sizes to create the perfect look.
|Unpolished||> 0.42||<.05%||>450 lbs.||8||Resistant||N/A|
|Light Polished||< 0.42||<.05%||>450 lbs.||8||Resistant||N/A|
A DCOF value of > 0.42 is the new standard for tiles specified for commercial application in standard A137.1-2012, Section 9.6. It replaces the SCOF value of > 0.60 referenced in ASTM C1028. For more information on the correlation between the two values and about the DCOF AcuTest, click here for more information or visit the Tile Council of North America's website: www.tcnatile.com
- These tiles have a dynamic coefficient of friction less than 0.42 as measured by the DCOF AcutestTM method. Tiles with DCOF Acutest values less than .42 are not recommended for use in areas with wet or slippery conditions. If such tiles are used as a walking surface where water, ice, oil, grease and/or other substances are present, such a condition could cause a reduction in foot traction and become unexpectedly slippery resulting in a fall and personal injury. See ANSI standard A137.1 section 18.104.22.168.10, available at www.tcnatile.com/section22.214.171.124.10.html.
- Water, oil, grease, etc. create slippery conditions. Floor applicatons with exposure to these conditions require extra caution in product selection. Not for use on ramps.
- For addtional information, refer to Factors to Consider.
- Since there is a shade variation on all natural products, the tile and trim supplied for your particular installation may not match these samples. Final selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards.
|Target DCOF wet||Tile Texture or
|Dry & Level||n/a||n/a|
|Wet & Level||≥ 0.42||Optional|
|Commercial Dining Areas||≥ 0.50||Optional|
|Pool Decking & other wet areas with minimal footwear||≥ 0.55||Required if tile size is > 3x3|
|Covered Exterior||≥ 0.60||Required if tile size is > 3x3|
|Interior Ramps, Inclines and Uncovered Exterior||≥ 0.65||Required if tile size is > 6x6|
*Unpolished surface only.
|6 1/2 x 6 1/2||
(6 1/2" x 6 1/2")
(16.5 cm x 16.5 cm)
Pieces Per Carton: 36
|13 x 13||
(13 1/8" x 13 1/8")
(33.3 cm x 33.3 cm)
Pieces Per Carton: 13
|13 x 20||
(13 1/8" x 19 11/16")
(33.3 cm x 50.0 cm)
Pieces Per Carton: 7
|16 x 24||
(16" x 24")
(40.8 cm x 61.4 cm)
Pieces Per Carton: 5
Available in unpolished and light polished surface.
|20 x 20||
(19 11/16" x 19 11/16")
(50.0 cm x 50.0 cm)
Pieces Per Carton: 5
|Bullnose||S-43E9||3 x 13|
Floor bullnose trim is intended to coordinate with floor field tile in the standard 90-degree installation position.