Florentine ™ Glazed Porcelain

Reveal Imaging™
Reveal Imaging

This state-of-the-art digital printing process produces realistic color, detail and veining that is unique on every single tile, for a look that's virtually indistinguishable from natural stone. Click here to explore the benefits of Reveal Imaging.

Tru-Edge
Tru-Edge

TruEdge products mean each tile is rectified and modular, which allows for the use of smaller grout joints and even more design flexibility.

Pre-Consumer
Pre-Consumer

Indicates the use of pre-consumer recycled material content in a product.

Certified Porcelain
Certified Porcelain

Indicates product is certified by the Porcelain Tile Certification Agency. Daltile is committed to providing only the highest quality porcelain products. Every porcelain product we offer has been certified - or is in the process of being certified - by the PTCA.

Product Image

Roll over to zoom product

Photo featured Nociolla on the floor.



 
The Luxurious Look of Natural Stone in a Sustainable Tile
Florentine from Daltile is for those who admire the elegance of marble and stone, but desire the durability and low-maintenance of ceramic tile. This timeless style mimics the unique tones of marble and stone with a color palette of crisp whites, neutral tans and fresh grays. Transform your area with the Florentine collection.
Tile Thickness:
3/8"
Minimum
Grout Joint
Recommendation:
10x14 Wall - 1/16"; 12x24 Wall, Floor, & Mosaic - 1/8" (3/16" when rectangular sizes are used in a staggered brick-joint pattern. Overlap should not exceed 33%)
Shade Variation:
High (V3)
  D.C.O.F. Moisture Breaking   Chemical Abrasion
Wet Absorption Strength MOH's Resistance Resistance
  Floor & Mosaic (Matte Finish)  > 0.42 <0.5%  >325 lbs. 8 Resistant 3-4
  Wall (Glossy Finish)  N/A <20.0%  100-230 lbs. 4.0-6.5 Resistant N/A

A DCOF value of > 0.42 is the new standard for tiles specified for commercial application in standard A137.1-2012, Section 9.6. It replaces the SCOF value of > 0.60 referenced in ASTM C1028. For more information on the correlation between the two values and about the DCOF AcuTest, click here for more information or visit the Tile Council of North America's website: www.tcnatile.com

Floor Applications
Target DCOF wet Tile Texture or
Added Abrasive
Suitable
Dry & Level n/a n/a  
Wet & Level ≥ 0.42 Optional  
Commercial Dining Areas ≥ 0.50 Optional  
Pool Decking & other wet areas with minimal footwear ≥ 0.55 Required if tile size is > 3x3  
Covered Exterior ≥ 0.60 Required if tile size is > 3x3  
Interior Ramps, Inclines and Uncovered Exterior ≥ 0.65 Required if tile size is > 6x6  
Other Applications
Suitable
Walls/Backsplashes  
Countertops  
Pool Linings  

Notes:

  • Wall tile not suitable for floor application due to glossy surface.

Size     Shape
24 x 24 Floor Tile
(23 7/16" x 23 7/16")
(59.44 cm x 59.44 cm)
Pieces Per Carton: 4
SQFT: 15.42
Matte Finish
 
  24" x 24" Floor Tile
12 x 24 Floor Tile
(11 5/8" x 23 7/16")
(29.56 cm x 59.44 cm)
Pieces Per Carton: 8
SQFT: 15.38
Matte Finish
 
  12" x 24" Floor Tile
12 x 12 Floor Tile
(11 1/2" x 11 1/2")
(29.56 cm x 29.56 cm)
Pieces Per Carton: 11
SQFT: 10.55
Matte Finish
 
  12" x 12" Floor Tile
2 x 4 Brick-joint Mosaic
(11 7/8" x 12 7/8")
(30.2 cm x 32.6 cm)
Pieces Per Carton: 12
SQFT: 10
Matte Finish
 
  2" x 4" Brick-joint Mosaic
12 x 24 Wall Tile
(11 5/8" x 23 7/16")
(29.56 cm x 59.44 cm)
Pieces Per Carton: 6
SQFT: 11.64
Glossy Finish
 
  12" x 24" Wall Tile
10 x 14 Wall Tile
(9 27/32" x 13 3/4")
(25.0 cm x 35.0 cm)
Pieces Per Carton: 12
SQFT: 11.62
Glossy Finish
 
  10" x 14" Wall Tile
Description   Shape Number Size Shape
Wall Bullnose (10" side)   S-4310 3 x 10 Wall Bullnose (10" side) S-4310 - 3" x 10"
Wall Bullnose Corner   SN-4310 3 x 3 Wall Bullnose Corner SN-4310 - 3" x 3"
Floor Bullnose   S-43C9F 3 x 12 Floor Bullnose S-43C9F - 3" x 12"
Wall Bullnose   S-43C9W 3 x 12 Wall Bullnose S-43C9W - 3" x 12"

Notes:

  • Floor bullnose trim is intended to coordinate with floor field tile in the standard 90-degree installation position.