Levaro Glazed Porcelain

Made in the USA
Made in the USA

When your project goals require sourcing of materials made in the United States, look for this symbol to help you determine which of our product lines help you meet that standard. Icon indicates that all or select items within a series are made in the U.S.A.

Reveal Imaging™
Reveal Imaging

This state-of-the-art digital printing process produces realistic color, detail and veining that is unique on every single tile, for a look that's virtually indistinguishable from natural stone. Click here to explore the benefits of Reveal Imaging.


Products infused with Microban® Antimicrobial Technology have a long-lasting, durable layer of protection from stain- and odor-causing bacteria, keeping the tile cleaner between cleanings. Click here to learn more.


Indicates the use of post-consumer recycled material content in a product.


Indicates the use of pre-consumer recycled material content in a product.

Certified Porcelain
Certified Porcelain

Indicates product is certified by the Porcelain Tile Certification Agency. Daltile is committed to providing only the highest quality porcelain products. Every porcelain product we offer has been certified - or is in the process of being certified - by the PTCA.

Product Image

Roll over to zoom product

Photo features Noce Woodlands in 13 x 13 on the floor.

Travertine offers a classic look, having been used in some of the world’s greatest structures. Its beauty is timeless, with natural tones and unique patterns. With Levaro’s Reveal Imaging™ technology you can bring the beautiful look of travertine to every design with incredible color, detail and veining that is uniquely produced on every tile. Infused with Microban®, Levaro stays cleaner between cleanings and maintenance is made simple on an easy-to-clean tile surface with a look that’s virtually indistinguishable from natural stone.
Tile Thickness:
5/16"; 1/4" mosaics
Relative Pricing:
Grout Joint
3/16" floor; 1/16" wall; 1/8" mosaics
Shade Variation:
Random (V4)
  D.C.O.F. Moisture Breaking   Chemical Abrasion
Wet Absorption Strength MOH's Resistance Resistance
  Floor  > 0.42 <0.5%  >275 lbs. 8 Resistant 4
  Wall  < 0.42 <20.0%  120-230 lbs. 4.0 - 6.5 Resistant N/A
  Mosaic  > 0.42 <3.0%  >275 lbs. 8 Resistant 4

A DCOF value of > 0.42 is the new standard for tiles specified for commercial application in standard A137.1-2012, Section 9.6. It replaces the SCOF value of > 0.60 referenced in ASTM C1028. For more information on the correlation between the two values and about the DCOF AcuTest, click here for more information or visit the Tile Council of North America's website: www.tcnatile.com

Manufacturers Warning:

  • These tiles have a dynamic coefficient of friction less than 0.42 as measured by the DCOF AcutestTM method. Tiles with DCOF Acutest values less than .42 are not recommended for use in areas with wet or slippery conditions. If such tiles are used as a walking surface where water, ice, oil, grease and/or other substances are present, such a condition could cause a reduction in foot traction and become unexpectedly slippery resulting in a fall and personal injury. See ANSI standard A137.1 section, available at www.tcnatile.com/section6.
  • Water, oil, grease, etc. create slippery conditions. Floor applicatons with exposure to these conditions require extra caution in product selection. Not for use on ramps.
  • For addtional information, refer to Factors to Consider.
  • Since there is a shade variation on all natural products, the tile and trim supplied for your particular installation may not match these samples. Final selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards.
  Residential Light
Commercial Residential Commercial
Floors/Patios (Covered & Uncovered)  
Pool Decking          
Pool Linings
Floors Walls Countertops Exterior Patios Exterior Pool Decks


  • Floor and mosaic tile suitable for exterior floors & walls in freezing and non-freezing climates when proper installation methods are followed. Wall field tile suitable for exterior walls in non-freezing climates when proper installation methods are followed.
    Wall tile not suitable for use on floors.

Size     Shape
20 x 20 Field Tile
(19 3/4" x 19 3/4")
(50.2 cm x 50.2 cm)
Pieces Per Carton: 6
SQFT: 16.27
  20" x 20" Field Tile
13 x 20 Field Tile
(13 1/8" x 19 3/4")
(33.3 cm x 50.2 cm)
Pieces Per Carton: 7
SQFT: 12.86
  13" x 20" Field Tile
13 x 13 Field Tile
(13 1/8" x 13 1/8")
(33.3 cm x 33.3 cm)
Pieces Per Carton: 14
SQFT: 16.72
  13" x 13" Field Tile
10 x 14 Field Tile
(9 27/32" x 13 31/32")
(25.0 cm x 35.5 cm)
Pieces Per Carton: 15
SQFT: 14.58
  10" x 14" Field Tile
6 1/2 x 6 1/2 Field Tile
(6 7/16" x 6 7/16")
(16.4 cm x 16.4 cm)
Pieces Per Carton: 54
SQFT: 15.63
  6 1/2" x 6 1/2" Field Tile
3 x 3 Mosaic
(11 15/16" x 23 15/16")
(30.2 cm x 60.9 cm)
Pieces Per Carton: 12
SQFT: 24
  3" x 3" Mosaic
3 x 13 Floor Decorative Border
(3" x 13 1/8")
(7.6 cm x 33.3 cm)
Pieces Per Carton: 8
  3" x 13" Floor Decorative Border
2 x 10 Wall Decorative Border
(3" x 9 27/32")
(5.06 cm x 25.0 cm)
Pieces Per Carton: 20
  2" x 10" Wall Decorative Border
Description   Shape Number Size Shape
Bullnose Made in the USA   P-43E9 3 x 13 Bullnose P-43E9 - 3" x 13"
Bullnose   S-4310 3 x 10 Bullnose S-4310 - 3" x 10"
Bullnose   S-4339 3 x 3 Bullnose S-4339 - 3" x 3"
Bullnose Corner   SN-4310 3 x 3 Bullnose Corner SN-4310 - 3" x 3"


  • Floor Bullnose trim is intended to coordinate with floor field tile in the standard 90-degree installation position.