Unity ColorBody™ Porcelain

Tru-Edge
Tru-Edge

TruEdge products mean each tile is rectified and modular, which allows for the use of smaller grout joints and even more design flexibility.

Exterior Product
Exterior Product

Indicates products suitable for exterior applications.

Certified Porcelain
Certified Porcelain

Indicates product is certified by the Porcelain Tile Certification Agency. Daltile is committed to providing only the highest quality porcelain products. Every porcelain product we offer has been certified - or is in the process of being certified - by the PTCA.

Product Image

Roll over to zoom product

Photo features Avorio & Tobacco 12 x 24 field tile and Urban Metals 2 x 12 spiral border on the floor.



 
The Unity of Performance and Style Without Compromise. Your space requires peak performance and outstanding durability. Your design, however, calls for contemporary style and sophistication. This can be achieved with the new ColorBody Porcelain line, Unity. This double-load porcelain tile is one of the toughest tiles available, yet it doesn’t compromise on style. Style and performance unite with Unity from Daltile.
Tile Thickness:
3/8"
Minimum
Grout Joint
Recommendation:
1/8" (3/16" when rectangular sizes are used in a staggered brick-joint pattern where the overlap does not exceed 33%)
Shade Variation:
Medium (V2)
  D.C.O.F. Moisture Breaking   Chemical Abrasion
Wet Absorption Strength MOH's Resistance Resistance
  Textured  > 0.42 <0.5%  >450 lbs. 8.0 Resistant N/A
  Unpolished  > 0.42 <0.5%  >450 lbs. 8.0 Resistant N/A
  Polished  < 0.42 <0.5%  >450 lbs. 8.0 Resistant N/A

A DCOF value of > 0.42 is the new standard for tiles specified for commercial application in standard A137.1-2012, Section 9.6. It replaces the SCOF value of > 0.60 referenced in ASTM C1028. For more information on the correlation between the two values and about the DCOF AcuTest, click here for more information or visit the Tile Council of North America's website: www.tcnatile.com

Manufacturers Warning:

  • These tiles have a dynamic coefficient of friction less than 0.42 as measured by the DCOF AcutestTM method. Tiles with DCOF Acutest values less than .42 are not recommended for use in areas with wet or slippery conditions. If such tiles are used as a walking surface where water, ice, oil, grease and/or other substances are present, such a condition could cause a reduction in foot traction and become unexpectedly slippery resulting in a fall and personal injury. See ANSI standard A137.1 section 6.2.2.1.10, available at www.tcnatile.com/section6.2.2.1.10.html.
  • Water, oil, grease, etc. create slippery conditions. Floor applicatons with exposure to these conditions require extra caution in product selection. Not for use on ramps.
  • For addtional information, refer to Factors to Consider.
  • Since there is a shade variation on all natural products, the tile and trim supplied for your particular installation may not match these samples. Final selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards.
COMMERCIAL USAGE
APPLICATION INTERIOR EXTERIOR
  Residential Light
Commercial
Commercial Residential Commercial
Floors/Patios (Covered & Uncovered)
Walls/Backsplashes
Countertops
Pool Decking
Pool Linings
Pool Tank/Submerged          
RESIDENTIAL USAGE
APPLICATION
Floors Walls Countertops Exterior Patios Exterior Pool Decks
F W C E E

Notes:

  • Suitable for Commercial Interiors & Residential Exteriors in Unpolished & Textured surfaces only.
    Textured Surface: Suitable for exterior floors (including pool decks) and walls in freezing and non-freezing climates when proper installation methods are followed.
    Unpolished Surface: Suitable for exterior floors (excluding pool decks) and walls in freezing and non-freezing climates when proper installation methods are followed.
    Polished Surface: Suitable for exterior walls in freezing and non-freezing climates when proper installation methods are followed.

Size     Shape
12 x 12 Field Tile
(11 3/4" x 11 3/4")
(30.0 cm x 30.0 cm)
Pieces Per Carton: 11
SQFT: 11
(Polished & Unpolished)
 
  12" x 12" Field Tile
12 x 24 Field Tile
(11 3/4" x 23 9/16")
(30.0 cm x 60.0 cm)
Pieces Per Carton: 8
SQFT: 16
(Polished, Unpolished & Textured)
 
  12" x 24" Field Tile
24 x 24 Field Tile
(23 9/16" x 23 9/16")
(60.0 cm x 60.0 cm)
Pieces Per Carton: 4
SQFT: 16
(Polished & Unpolished)
 
  24" x 24" Field Tile
12 x 12 Modern Liner
(11 3/4" x 11 3/4")
(30 cm x 30 cm)
Pieces Per Carton: 11
(Combination of surfaces)
 
  12" x 12" Modern Liner
Description   Shape Number Size Shape
Bullnose   S-43C9 3 x 12 Bullnose S-43C9 - 3" x 12"
Cove Base   S-36C9T 6 x 12 Cove Base S-36C9T - 6" x 12"
Cove Base Corner   SC-36C9T 1 x 6 Cove Base Corner SC-36C9T - 1" x 6"

Notes:

  • Cove Base and Floor Bullnose trim are intended to coordinate with floor field tile in the standard 90-degree installation position.