Yacht Club ™ Glazed Porcelain
TruEdge products mean each tile is rectified and modular, which allows for the use of smaller grout joints and even more design flexibility.
Indicates product is certified by the Porcelain Tile Certification Agency. Daltile is committed to providing only the highest quality porcelain products. Every porcelain product we offer has been certified - or is in the process of being certified - by the PTCA.
Roll over to zoom product
Photo features Bridge Deck 6 x 24 field tile in a grid pattern on the floor.
Wood inspired visual with subtle, linear movement
Use of a latex modified thin-set is recommended for proper installation.
Since there are variations in all fired ceramic products, tile and trim supplied for your particular installation may not match these samples. Final color selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A 137.1 standards.
|> 0.42||<0.5%||>275 lbs.||8||Resistant||4|
A DCOF value of > 0.42 is the new standard for tiles specified for commercial application in standard A137.1-2012, Section 9.6. It replaces the SCOF value of > 0.60 referenced in ASTM C1028. For more information on the correlation between the two values and about the DCOF AcuTest, click here for more information or visit the Tile Council of North America's website: www.tcnatile.com
|Target DCOF wet||Suitable|
|Dry & Level - Interior||n/a|
|Wet & Level - Interior||≥ 0.42|
|Commercial Dining Areas||≥ 0.50|
|Exterior Applications; Pool Decking & Other Wet Areas with Minimal Footwear||≥ 0.60|
|Covered Exterior||≥ 0.60|
|Ramps & Inclines||≥ 0.65|
|6 x 24 Floor Tile||
(5 3/4" x 23 7/16")
(14.62 cm x 59.44 cm)
Pieces Per Carton: 11
|Bullnose||S-46F9||6 x 24|
Floor bullnose trim is intended to coordinate with floor field tile in the standard 90-degree installation position.