EC1 ™ ColorBody™ Porcelain


TruEdge products mean each tile is rectified and modular, which allows for the use of smaller grout joints and even more design flexibility.

Exterior Product
Exterior Product

Indicates products suitable for exterior applications.


Indicates the use of pre-consumer recycled material content in a product.

Certified Porcelain
Certified Porcelain

Indicates product is certified by the Porcelain Tile Certification Agency. Daltile is committed to providing only the highest quality porcelain products. Every porcelain product we offer has been certified - or is in the process of being certified - by the PTCA.

Product Image

Roll over to zoom product

Photo features Holborn Textured in 12 x 24 on the wall.

View all NEXT™ Series

Sleek, trendy colors and accents, multiple large format sizes, and a choice of durable surfaces make EC1 a top choice for style and selection. This ColorBody Porcelain offers designers and architects an array of stylish options and is suitable for many exterior applications. EC1 is an eco-friendly product being produced using a high percentage of recycled materials.


  • All colors available in Polished, Unpolished, Honed & Textured surfaces.

  • Special care should be taken when grouting with dark pigmented colors. A grout release is recommended to prevent finely powdered pigments from lodging in the pores of the tile surface.

  • Extended lead times apply. Please contact your SSC representative for more information.

Tile Thickness:
7/16" (11 mm - Unpolished, Textured & Honed)
3/8" (10 mm - Polished)
Relative Pricing:
Grout Joint
1/8" (3/16" when rectangular sizes are used in a staggered brick-joint pattern, where the overlap does not exceed 33%).
Shade Variation:
Medium (V2)
  D.C.O.F. Moisture Breaking   Chemical Abrasion
Wet Absorption Strength MOH's Resistance Resistance
  Unpolished  > 0.42 <0.5%  >400 lbs. 7.0 Resistant N/A
  Polished  < 0.42 <0.5%  >400 lbs. 7.0 Resistant N/A
  Honed  < 0.42 <0.5%  >400 lbs. 7.0 Resistant N/A
  Textured  > 0.42 <0.5%  >400 lbs. 7.0 Resistant N/A

A DCOF value of > 0.42 is the standard for tiles specified for level interior spaces expected to be walked upon when wet, as stated in ANSI A137.1-2012, Section 9.6. For more information about DCOF and the DCOF AcuTestâ„¢, click here or visit the Tile Council of North America's website:

Manufacturer Advisory:

  • These tiles have a dynamic coefficient of friction < 0.42 as measured by the DCOF Acutest method. Tiles with DCOF values < 0.42 are not recommended for use in areas with wet or slippery conditions. For more information, see ANSI standard A137.1 section, available at
  • Water, oil, grease, etc. create slippery conditions. Floor applicatons with exposure to these conditions require extra caution in product selection. Not for use on ramps.
  • For addtional information, refer to Factors to Consider.
  • Since there is a shade variation on all natural products, the tile and trim supplied for your particular installation may not match these samples. Final selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards.
  Residential Light
Commercial Residential Commercial
Floors/Patios (Covered & Uncovered)
Pool Decking * * * * *
Pool Linings
Floors Walls Countertops Exterior Patios Exterior Pool Decks
F W C E E*


  • Residential Exterior Floors suitable in Unpolished & Textured surfaces only.

    *Pool Decking suitable in Textured surface only.

    Textured Surface: Suitable for pool decks and patios in freezing and non-freezing climates when proper installation methods are followed.

    Unpolished, Polished, & Honed: Suitable for exterior walls in freezing & non-freezing climates when proper installation methods are followed.

Size     Shape
24 x 48 Field Tile
(24" x 48")
(60.0 cm x 120.0 cm)
Pieces Per Carton: 2
SQFT: 15.49
Polished, Unpolished, Textured, Honed
  24" x 48" Field Tile
24 x 24 Field Tile
(24" x 24")
(60.0 cm x 60.0 cm)
Pieces Per Carton: 4
SQFT: 15.49
Polished, Unpolished, Textured, Honed
  24" x 24" Field Tile
12 x 24 Field Tile
(12" x 24")
(30.0 cm x 60.0 cm)
Pieces Per Carton: 6
SQFT: 11.62
Polished, Unpolished, Textured, Honed
  12" x 24" Field Tile
4 x 24 Field Tile
(4" x 24")
(10.0 cm x 60.0 cm)
Pieces Per Carton: 16
SQFT: 10.33
Unpolished, Textured, Honed
  4" x 24" Field Tile
6 x 24 Random Linear Accent
(6" x 24")
(15.0 cm x 60.0 cm)
Pieces Per Carton: 6
  6" x 24" Random Linear Accent
Description   Shape Number Size Shape
Bullnose   S44F9 4 x 24 Bullnose S44F9 - 4" x 24"
Stair Tread   S-6CF6 12 x 24 Stair Tread S-6CF6 - 12" x 24"


  • Trim available in Polished, Unpolished, Textured & Honed surfaces.

  • Floor bullnose trim is intended to coordinate with floor tile in the standard 90-degree installation position.