Lodge ColorBody™ Porcelain


TruEdge products mean each tile is rectified and modular, which allows for the use of smaller grout joints and even more design flexibility.

Exterior Product
Exterior Product

Indicates products suitable for exterior applications.

Certified Porcelain
Certified Porcelain

Indicates product is certified by the Porcelain Tile Certification Agency. Daltile is committed to providing only the highest quality porcelain products. Every porcelain product we offer has been certified - or is in the process of being certified - by the PTCA.

Product Image

Roll over to zoom product

Photo features Lodge Sabi Sabi on the floor.

Lodge™ ColorBody™ Porcelain is the perfect fusion of rustic meets contemporary. With a refined stone visual and smooth Tru-Edge™ cut, Lodge offers a compelling visual at an affordable price. Available in five warm colors and coordinating modern liner accents, Lodge is sure to complement any project. The option of four field sizes available in three surface textures offers a wide range of application uses, including residential and commercial exteriors.


  • Special care should be taken when grouting with dark pigmented colors. A grout release is recommended to prevent finely powdered pigment from lodging in the pores of the tile surface. Use of a latex modified thin-set is recommended for installation.

Tile Thickness:
Grout Joint
Shade Variation:
Medium (V2)
  D.C.O.F. Moisture Breaking   Chemical Abrasion
Wet Absorption Strength MOH's Resistance Resistance
  Textured  > 0.42 <0.5%  >450 lbs. 8.0 Resistant N/A
  Unpolished  > 0.42 <0.5%  >450 lbs. 8.0 Resistant N/A
  Light Polished  < 0.42 <0.5%  >450 lbs. 8.0 Resistant N/A

A DCOF value of > 0.42 is the new standard for tiles specified for commercial application in standard A137.1-2012, Section 9.6. It replaces the SCOF value of > 0.60 referenced in ASTM C1028. For more information on the correlation between the two values and about the DCOF AcuTest, click here for more information or visit the Tile Council of North America's website: www.tcnatile.com

Manufacturers Warning:

  • These tiles have a dynamic coefficient of friction less than 0.42 as measured by the DCOF AcutestTM method. Tiles with DCOF Acutest values less than .42 are not recommended for use in areas with wet or slippery conditions. If such tiles are used as a walking surface where water, ice, oil, grease and/or other substances are present, such a condition could cause a reduction in foot traction and become unexpectedly slippery resulting in a fall and personal injury. See ANSI standard A137.1 section, available at www.tcnatile.com/section6.
  • Water, oil, grease, etc. create slippery conditions. Floor applicatons with exposure to these conditions require extra caution in product selection. Not for use on ramps.
  • For addtional information, refer to Factors to Consider.
  • Since there is a shade variation on all natural products, the tile and trim supplied for your particular installation may not match these samples. Final selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards.
  Residential Light
Commercial Residential Commercial
Floors/Patios (Covered & Uncovered) * ^
Pool Decking ^ ^ ^ ^ ^
Pool Linings
Floors Walls Countertops Exterior Patios Exterior Pool Decks
F W C E* E^


  • Not for use on ramps.

  • *Unpolished and Textured surfaces only.

  • ^Textured surface only.

  • Textured surface - Suitable for exterior floors (including pool decks) and walls in freezing and non-freezing climates when proper installation methods are followed.

  • Unpolished & Light Polished surface - Suitable for exterior walls in freezing and non-freezing climates when proper installation methods are followed.

Size     Shape
24 x 24 Field TIle
(23 9/16" x 23 9/16")
(60.0 cm x 60.0 cm)
Pieces Per Carton: 3
SQFT: 11.62
  24" x 24" Field TIle
16 x 32 Field Tile
(15 3/4" x 31 1/2")
(40.0 cm x 80.0 cm)
Pieces Per Carton: 4
SQFT: 13.77
  16" x 32" Field Tile
12 x 24 Field Tile
(11 3/4" x 23 9/16")
(30.0 cm x 60.0 cm)
Pieces Per Carton: 6
SQFT: 11.62
  12" x 24" Field Tile
12 x 12 Field Tile
(11 3/4" x 11 3/4")
(30.0 cm x 30.0 cm)
Pieces Per Carton: 11
SQFT: 10.65
  12" x 12" Field Tile
12 x 12 Modern Liner
(11 3/4" x 11 3/4")
(30.0 cm x 30.0 cm)
Pieces Per Carton: 11
  12" x 12" Modern Liner
Description   Shape Number Size Shape
Bullnose   S-43C9 3 x 12 Bullnose S-43C9 - 3" x 12"
Cove Base   S-36C9T 6 x 12 Cove Base S-36C9T - 6" x 12"
Cove Base Outcorner   SC-36C9T 1 x 6 Cove Base Outcorner SC-36C9T - 1" x 6"


  • Cove Base and Floor Bullnose trim are intended to coordinate with floor field tile in the standard 90-degree installation position.