Magma™ ColorBody™ Porcelain
TruEdge products mean each tile is rectified and modular, which allows for the use of smaller grout joints and even more design flexibility.
Indicates products suitable for exterior applications.
Indicates product is certified by the Porcelain Tile Certification Agency. Daltile is committed to providing only the highest quality porcelain products. Every porcelain product we offer has been certified - or is in the process of being certified - by the PTCA.
Roll over to zoom product
Photo features Magma Core, Hammered (Unpolished) 12 x 24 field tile on the floor and Ash, Grooved (Light Polished) 12 x 24 on the wall.
Special care should be given when installing tiles 20" and larger. Please click here for more information.
Since there are variations in all fired ceramic products, the tile and trim supplied for your particular installation may not match these samples. Final color selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards.
Special care should be taken when grouting with with dark pigmented colors. A grout release is recommended to prevent finely powdered pigments from lodging in the pores of the tile surface. Use of a latex modified thin-set is recommended for installation.
Grooved surface available in unpolished & light polished.
Diagonal surface available is unpolished only.
Hammered surface available in unpolished only.
Flat surface available in unpolished and light polished.
|Unpolished||> 0.42||<0.5%||>500 lbs.||8.0||Resistant||N/A|
|Light Polished||< 0.42||<0.5%||>500 lbs.||8.0||Resistant||N/A|
A DCOF value of > 0.42 is the new standard for tiles specified for commercial application in standard A137.1-2012, Section 9.6. It replaces the SCOF value of > 0.60 referenced in ASTM C1028. For more information on the correlation between the two values and about the DCOF AcuTest, click here for more information or visit the Tile Council of North America's website: www.tcnatile.com
- These tiles have a dynamic coefficient of friction less than 0.42 as measured by the DCOF AcutestTM method. Tiles with DCOF Acutest values less than .42 are not recommended for use in areas with wet or slippery conditions. If such tiles are used as a walking surface where water, ice, oil, grease and/or other substances are present, such a condition could cause a reduction in foot traction and become unexpectedly slippery resulting in a fall and personal injury. See ANSI standard A137.1 section 220.127.116.11.10, available at www.tcnatile.com/section18.104.22.168.10.html.
- Water, oil, grease, etc. create slippery conditions. Floor applicatons with exposure to these conditions require extra caution in product selection. Not for use on ramps.
- For addtional information, refer to Factors to Consider.
- Since there is a shade variation on all natural products, the tile and trim supplied for your particular installation may not match these samples. Final selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards.
|Floors/Patios (Covered & Uncovered)|
|Floors||Walls||Countertops||Exterior Patios||Exterior Pool Decks|
Suitable for freezing and non-freezing climates when proper installation methods are followed.
*Hammered Unpolished FInish: Suitable for exterior patios (including pool decks) and walls in freezing and non-freezing climates when proper installation methods are followed.
Floor application suitable for unpolished finish only for light commercial, commercial, and residential and commercial exteriors.
|12 x 24 Field Tile||
(11 13/16" x 23 5/8")
(30.0 cm x 60.0 cm)
Pieces Per Carton: 6
|18 x 36 Field Tile||
(17 11/16" x 35 7/16")
(45.0 cm x 90.0 cm)
Pieces Per Carton: 3
18" x 36" Field Tile available in Flat surface only (Unpolished & Light Polished).
|Bullnose||S44F9||4 x 24|
|Cove Base||S-36C9T||6 x 12|
|Cove Base Corner||SC-36C9T||1 x 6|
Bullnose available in Flat surface Unpolished and Light Polished only.
Cove Base & Cove Base Corner available in Flat surface Unpolished only.
Cove Base and Floor Bullnose trim are intended to coordinate with floor field tile in the standard 90-degree installation position.