Sandalo ™ Ceramic Floor & Wall

Product Image

Roll over to zoom product

Photo features Sandalo Castillian Gray



 
Take your space to a whole new level. The possibilities are endless with Daltile's distinctive Sandaloâ„¢ collection. Available in a multitude of sizes, with accents and trims to match, it is perfect for residential and light commercial applications. The soft colors emulate natural stone, but with the easy maintenance of tile. Complete your project with the beautiful floor, wall, and mosaic combinations of this dynamic and resourceful collection.
Tile Thickness:
5/16" Floor & Wall, 1/4" Mosaics
Relative Pricing:
Low
Minimum
Grout Joint
Recommendation:
3/16" Floor, 1/16" Wall, 1/8" Mosaics
Shade Variation:
High (V3)
  D.C.O.F. Moisture Breaking   Chemical Abrasion
Wet Absorption Strength MOH's Resistance Resistance
  Floor  > 0.42 < 3.0%  =250 lbs. 8 Resistant Floor - 4
  Wall  < 0.42 < 20.0%  >100-230 lbs. 4.0-6.5 Resistant Wall - N/A

A DCOF value of > 0.42 is the standard for tiles specified for level interior spaces expected to be walked upon when wet, as stated in ANSI A137.1-2012, Section 9.6. For more information about DCOF and the DCOF AcuTestâ„¢, click here or visit the Tile Council of North America's website: www.tcnatile.com.

Manufacturer Advisory:

  • These tiles have a dynamic coefficient of friction < 0.42 as measured by the DCOF Acutest method. Tiles with DCOF values < 0.42 are not recommended for use in areas with wet or slippery conditions. For more information, see ANSI standard A137.1 section 6.2.2.1.10, available at www.tileusa.com.
  • Water, oil, grease, etc. create slippery conditions. Floor applicatons with exposure to these conditions require extra caution in product selection. Not for use on ramps.
  • For addtional information, refer to Factors to Consider.
  • Since there is a shade variation on all natural products, the tile and trim supplied for your particular installation may not match these samples. Final selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards.
Floor Applications
Target DCOF wet Suitable
Dry & Level - Interior n/a  
Wet & Level - Interior ≥ 0.42  
Commercial Dining Areas ≥ 0.50  
Exterior Applications; Pool Decking & Other Wet Areas with Minimal Footwear ≥ 0.60  
Covered Exterior ≥ 0.60  
Ramps & Inclines ≥ 0.65  
Other Applications
Suitable
Walls/Backsplashes  
Countertops  
Pool Linings  
Size     Shape
2 x 2
(11 15/16" x 23 15/16")
(30.2 cm x 60.9 cm)
 
  2" x 2"
3 x 12 floor/wall border
(3" x 12")
(7.9 cm x 30.0 cm)
 
  3" x 12" floor/wall border
6 x 6
(6" x 6")
(15.2 cm x 15.2 cm)
 
  6" x 6"
9 x 12
(8 15/16" x 11 15/16")
(22.7 cm x 30.30 cm)
 
  9" x 12"
12 x 12*
(11 13/16" x 11 13/16")
(30.0 cm x 30.0 cm)
Pieces Per Carton: 15
SQFT: 14.55
 
  12" x 12"*
18 x 18*
(17 3/4" x 17 3/4")
(45.2 cm x 45.2 cm)
Pieces Per Carton: 8
SQFT: 17.04
 
  18" x 18"*

Notes:

  • *This product is manufactured regionally. Slight variances in size and shading may occur between regions. Please contact your sales representative to verify carton square footage. As with all tile projects, be sure to purchase sufficient quantities with your initial order.

Description   Shape Number Size Shape
Bullnose   P-43C9 3 x 12 Bullnose P-43C9 - 3" x 12"
Wall Bullnose (6" side)   S-4269 2 x 6 Wall Bullnose (6" side) S-4269 - 2" x 6"
Bullnose (9" side)   S-4309 3 x 9 Bullnose (9" side) S-4309 - 3" x 9"
Bullnose   S-4669 6 x 6 Bullnose S-4669 - 6" x 6"
Bullnose Corner   SCRL-4669 6 x 6 Bullnose Corner SCRL-4669 - 6" x 6"
Wall Bullnose Corner   SN-4269 2 x 2 Wall Bullnose Corner SN-4269 - 2" x 2"
Bullnose Corner   SN-4309 3 x 3 Bullnose Corner SN-4309 - 3" x 3"
Counter Corner   22CRCN 2 x 2 Counter Corner 22CRCN - 2" x 2"
Counter Rail   26CRWL 2 x 6 Counter Rail 26CRWL - 2" x 6"
Quarter Round   A-106 1 x 6 Quarter Round A-106 - 1" x 6"
Quarter Round Corner   UC-106 1 x 1 Quarter Round Corner UC-106 - 1" x 1"
Stretcher   S-886 2 x 2 Stretcher S-886 - 2" x 2"

Notes:

  • Floor bullnose trim is intended to coordinate with floor tile in the standard 90-degree installation position.