Sandalo™ Ceramic Floor & Wall
Daltile is proud to champion innovation within the industry, as one of the first to support Green Squared, a new standard for sustainable projects. Most of our products have already achieved Green Squared Certification and meet the industry’s toughest green standard to date.
Roll over to zoom product
Photo features Sandalo Castillian Gray.
Floor Field Tile
Wall Field Tile
Wall Decorative Accents
Mosaic Field Tile
|Floor||> 0.42||< 3.0%||=250 lbs.||8||Resistant||Floor - 4|
|Wall||< 0.42||< 20.0%||>100-230 lbs.||4.0-6.5||Resistant||Wall - N/A|
A DCOF value of > 0.42 is the new standard for tiles specified for commercial application in standard A137.1-2012, Section 9.6. It replaces the SCOF value of > 0.60 referenced in ASTM C1028. For more information on the correlation between the two values and about the DCOF AcuTest, click here for more information or visit the Tile Council of North America's website: www.tcnatile.com
- These tiles have a dynamic coefficient of friction less than 0.42 as measured by the DCOF AcutestTM method. Tiles with DCOF Acutest values less than .42 are not recommended for use in areas with wet or slippery conditions. If such tiles are used as a walking surface where water, ice, oil, grease and/or other substances are present, such a condition could cause a reduction in foot traction and become unexpectedly slippery resulting in a fall and personal injury. See ANSI standard A137.1 section 22.214.171.124.10, available at www.tcnatile.com/section126.96.36.199.10.html.
- Water, oil, grease, etc. create slippery conditions. Floor applicatons with exposure to these conditions require extra caution in product selection. Not for use on ramps.
- For addtional information, refer to Factors to Consider.
- Since there is a shade variation on all natural products, the tile and trim supplied for your particular installation may not match these samples. Final selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards.
|Floors/Patios (Covered & Uncovered)|
|Floors||Walls||Countertops||Exterior Patios||Exterior Pool Decks|
Wall Tile suitable for residential bathroom floors only not subject to outside foot traffic.
Universal Border suitable for residential and light commercial use only.
|2 x 2||
(11 15/16" x 23 15/16")
(30.2 cm x 60.9 cm)
|3 x 12 floor/wall border||
(3" x 12")
(7.9 cm x 30.0 cm)
|6 x 6||
(6" x 6")
(15.2 cm x 15.2 cm)
|9 x 12||
(8 15/16" x 11 15/16")
(22.7 cm x 30.30 cm)
|12 x 12||
(11 13/16" x 11 13/16")
(30.0 cm x 30.0 cm)
|18 x 18||
(17 3/4" x 17 3/4")
(45.2 cm x 45.2 cm)
|Bullnose||A-4200||2 x 6|
|Bullnose||P-43C9||3 x 12|
|Bullnose||S-4269||2 x 6|
|Bullnose||S-4309||3 x 9|
|Bullnose||S-4669||6 x 6|
|Bullnose Corner||AN-4200||2 x 2|
|Bullnose Corner||SCRL-4669||6 x 6|
|Bullnose Corner||SN-4269||2 x 2|
|Bullnose Corner||SN-4309||3 x 3|
|Counter Corner||22CRCN||2 x 2|
|Counter Rail||26CRWL||2 x 6|
|Quarter Round||A-106||1 x 6|
|Quarter Round Corner||UC-106||1 x 1|
|Stretcher||S-886||2 x 2|
Floor Bullnose trim is intended to coordinate with floor field tile in the standard 90-degree installation position.