Terrace ™ ColorBody™ Porcelain
Indicates products suitable for exterior applications.
Indicates product is certified by the Porcelain Tile Certification Agency. Daltile is committed to providing only the highest quality porcelain products. Every porcelain product we offer has been certified - or is in the process of being certified - by the PTCA.
Roll over to zoom product
Photo features Terrace Cherry 6 x 36 field tile in a staggered brickwork pattern on the floor.
Special care should be taken when grouting with dark pigmented colors. A grout release is recommended to prevent pigments from lodging in the pores of the tile surface. Use of a latex modified thin-set is recommended for installation.
Since there are variations in all fired ceramic products, tile and trim supplied for your particular installation may not match these samples. Final color selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions.
|Floor||> 0.42||< 0.5%||> 400 lbs.||8.0||Resistant||N/A|
A DCOF value of > 0.42 is the new standard for tiles specified for commercial application in standard A137.1-2012, Section 9.6. It replaces the SCOF value of > 0.60 referenced in ASTM C1028. For more information on the correlation between the two values and about the DCOF AcuTest, click here for more information or visit the Tile Council of North America's website: www.tcnatile.com
|Target DCOF wet||Tile Texture or
|Dry & Level||n/a||n/a|
|Wet & Level||≥ 0.42||Optional|
|Commercial Dining Areas||≥ 0.50||Optional|
|Pool Decking & other wet areas with minimal footwear||≥ 0.55||Required if tile size is > 3x3|
|Covered Exterior||≥ 0.60||Required if tile size is > 3x3|
|Interior Ramps, Inclines and Uncovered Exterior||≥ 0.65||Required if tile size is > 6x6|
|6 x 36||
(5 3/4" x 35 3/4")
(14.6 cm x 90.8 cm)
Pieces Per Carton: 8
|Bullnose||S-43H9||3 x 18|
Floor bullnose trim is intended to coordinate with floor field tile in the standard 90-degree installation position.