Coastal Keystones Mosaic Tile

With Glass by Oceanside Glasstile® Exterior Product
Exterior Product

Indicates products suitable for exterior applications.

Post-Consumer
Post-Consumer

Indicates the use of post-consumer recycled material content in a product.

Pre-Consumer
Pre-Consumer

Indicates the use of pre-consumer recycled material content in a product.

Product Image

Roll over to zoom product

Photo features Coastal Keystones™ Mediterranean Mist Blend 1 hexagon mosaic on the wall.



1" x 1" Mosaic

2" x 1" Brick-Joint Mosaic

Block Random Mosaic

1" Hexagon Mosaic

Backsplash Design Ideas

 
Head for the shoreline and sail away with the Coastal Keystones collection. Transform a bathtub into a cruise ship and be motivated by this modern and luxurious mosaic tile that lets you escape. In a magnificent range of sizes and hues, the glass and mosaic blends of tile adds sophistication and a worldly feel to virtually any space indoor or out. Used on both floors and countertops in residential and light-commercial applications, this inspiring blend of some of Daltile's finest products gives you a sea of design options.

Notes:

  • Block Random Mosaic sheet can be cut into (3) 4" x 12" borders.

  • Special care should be taken when grouting with dark pigmented colors. A grout release is recommended to prevent pigments from lodging in the pores of the tile surface. Use of a latex thin-set is recommended for installation.

  • Strong random shading enhances the natural beauty of this product. To achieve optimal results, tile should be selected from multiple cartons and shading arrangement planned prior to installation.

  • Since there are variations in all fired ceramic products, tile and trim supplied for your particular installation may not match these samples. Final color selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions.

Tile Thickness:
1/4"
Minimum
Grout Joint
Recommendation:
Approximately 1/16"
Shade Variation:
High (V3) to Random (V4)
  D.C.O.F. Moisture Breaking   Chemical Abrasion
Wet Absorption Strength MOH's Resistance Resistance
    > 0.42 <0.5%  >350 8 Resistant N/A

A DCOF value of > 0.42 is the standard for tiles specified for level interior spaces expected to be walked upon when wet, as stated in ANSI A137.1-2012, Section 9.6. For more information about DCOF and the DCOF AcuTest™, click here or visit the Tile Council of North America's website: www.tcnatile.com.

Floor Applications
Target DCOF wet Suitable
Dry & Level - Interior n/a   *
Wet & Level - Interior ≥ 0.42  
Commercial Dining Areas ≥ 0.50  
Exterior Applications; Pool Decking & Other Wet Areas with Minimal Footwear ≥ 0.60  
Covered Exterior ≥ 0.60  
Ramps & Inclines ≥ 0.65  
Other Applications
Suitable
Walls/Backsplashes  
Countertops   ^
Pool Linings  
Pool Tank/Submerged  

Notes:

  • * Suitable for residential and light commercial floor use (such as hotel bath) not subject to outside foot traffic. Mosaic tile suitable for exterior applications in freezing and non-freezing climates when proper installation methods are followed.

  • † Coastal Keystones are paper face mounted and are suitable for pool tanks and submerged applications

  • ^ Residential and light commercial countertops only

Size     Shape
1 x 1 Mosaic
(11 7/8" x 11 7/8")
(30.1 cm x 30.1 cm)
Pieces Per Carton: 15
SQFT: 15.0
Paper-face Mounted
 
  1" x 1" Mosaic
1 Hexagon Mosaic
(12" x 12" Sheet)
(30.48 cm x 30.48 cm Sheet)
Pieces Per Carton: 15
SQFT: 15.00
Paper-face Mounted
 
  1" Hexagon Mosaic
2 x 1 Brick-Joint Mosaic
(11 7/8" x 12 7/8")
(30.1 cm x 32.6 cm)
Pieces Per Carton: 15
SQFT: 15.0
Paper-face Mounted
 
  2" x 1" Brick-Joint Mosaic
1 x 1, 2 x 1 & 2 x 2 Block Random Mosaic
(11 7/8" x 11 7/8")
(30.1 cm x 30.1 cm)
Pieces Per Carton: 15
SQFT: 15.0
Paper-face Mounted
 
  1" x 1", 2" x 1" & 2" x 2" Block Random Mosaic