Geo Flecks One Quartz

Product Image

Roll over to zoom product

Photo features Geo Flecks Alpine Shadow NQ20 on the counter.



  • SLAB NOTE: A factory exterior UV filler is available by special order.

  • TILE NOTE: Tiles in colors NQ02, NQ03, NQ07, NQ09, NQ10, and NQ11 can be special ordered. Contact your Daltile Sales Representative for more information.

  • TILE NOTE: ONE Quartz surfaces do not meet minimum coefficient of friction thresholds recommended by safety standard-setting organizations, except in special order sandblasted finish.

  • Preventing Heat and Other Damage: ONE Quartz Surfaces are heat-resistant under normal cooking conditions, however placing hot pots or pans directly onto the surface may cause cracks. The use of a trivet is recommended when setting these items on ONE™ Quartz Surfaces to avoid thermal shock. Customer misuse including negligence, physical/ chemical abuse, or extreme heat are not covered by this warranty.

  • WARNING: Harsh chemicals and excessive heat will damage ONE Quartz Surfaces. Shade variation is an inherent feature of ONE Quartz Surfaces and do not constitute defect.

Tile Thickness:
Grout Joint
Shade Variation:
Medium (V2)
  D.C.O.F. Moisture Breaking   Chemical Abrasion
Wet Absorption Strength MOH's Resistance Resistance
  Polished  < 0.42 .03 - .01%  1,207 lbs. N/A Resistant 60+
  Semi-Polished, Honed, Leather  < 0.42 .03 - .01%  1,207 lbs. N/A Resistant N/A
  Sandblasted  > 0.42 .03 - .01%  1,207 lbs. N/A Resistant N/A

A DCOF value of > 0.42 is the new standard for tiles specified for commercial application in standard A137.1-2012, Section 9.6. It replaces the SCOF value of > 0.60 referenced in ASTM C1028. For more information on the correlation between the two values and about the DCOF AcuTest, click here for more information or visit the Tile Council of North America's website:

Manufacturers Warning:

  • These tiles have a dynamic coefficient of friction less than 0.42 as measured by the DCOF AcutestTM method. Tiles with DCOF Acutest values less than .42 are not recommended for use in areas with wet or slippery conditions. If such tiles are used as a walking surface where water, ice, oil, grease and/or other substances are present, such a condition could cause a reduction in foot traction and become unexpectedly slippery resulting in a fall and personal injury. See ANSI standard A137.1 section, available at
  • Water, oil, grease, etc. create slippery conditions. Floor applicatons with exposure to these conditions require extra caution in product selection. Not for use on ramps.
  • For addtional information, refer to Factors to Consider.
  • Since there is a shade variation on all natural products, the tile and trim supplied for your particular installation may not match these samples. Final selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards.
  Residential Light
Commercial Residential Commercial
Floors/Patios (Covered & Uncovered)    
Pool Decking          
Pool Linings          
Floors Walls Countertops Exterior Patios Exterior Pool Decks


  • Neither honed nor polished Geo Flecks is suitable for exterior applications. The sun will etch the material.

  • SLAB NOTE: Only leather and sandblasted slab finishes are suitable for exteriors in non-freezing climates when proper installation methods are followed. Polished, semi-polished and honed finishes are not suitable for exterior applications due to possible etching.

Size     Shape
12 x 12
(11.81" x 11.81")
(30.0 cm x 30.0 cm)
SQFT: 8.73
  12" x 12"
12 x 24
(11.81" x 23.62")
(30.0 cm x 60.0 cm)
SQFT: 7.76
  12" x 24"
18 x 18
(17.91" x 17.91")
(45.5 cm x 45.5 cm)
SQFT: 8.92
  18" x 18"
24 x 24
(23.62" x 23.62")
(60.0 cm x 60.0 cm)
  24" x 24"
120 x 55
(120" x 55")
(305 cm x 140 cm)
  120" x 55"


  • TILE NOTE: Sizes that can be special ordered are: 12”X12”X1/2”, 12”X24”X1/2”, 18”X18”X1/2” and 24”X24”X1/2”. They can be special ordered in all colors except NQ15, NQ18, NQ19, NQ22, NQ71. Tiles can also be special ordered in all slab finishes: polished, easy care, honed, leather and sandblasted.


You May Also Like