Geo Flecks One Quartz Surfaces
Roll over to zoom product
Photo features Geo Flecks Spanish Moss on the countertop and Jewel Tide 5/8 Random Mosaic in Beach Pebble.
One Quartz Surfaces products are nonporous, reducing the potential for bacteria growth, resist common food stains and are stronger than natural granite.
ONE Quartz Surfaces products are, on average, 93% natural quartz stone providing consistent color and visual movement for a wide range of design possibilities. Actual quartz percentages vary by color. Test results reflecting the specific content per color are available upon request.
One Quartz Surfaces products are virtually maintenance free.
One Quartz Surfaces products have a durable, scratch-resistant surface.
One Quartz Surfaces products are heat and scorch-resistant under normal cooking conditions (use of a trivet is recommended for longer or extreme heat exposure).
|Polished||< 0.42||.03 - .01%||1,207 lbs.||N/A||Resistant||60+|
|Semi-Polished, Honed, Leather||< 0.42||.03 - .01%||1,207 lbs.||N/A||Resistant||N/A|
A DCOF value of > 0.42 is the standard for tiles specified for level interior spaces expected to be walked upon when wet, as stated in ANSI A137.1-2012, Section 9.6. For more information about DCOF and the DCOF AcuTest™, click here or visit the Tile Council of North America's website: www.tcnatile.com.
- These tiles have a dynamic coefficient of friction < 0.42 as measured by the DCOF Acutest method. Tiles with DCOF values < 0.42 are not recommended for use in areas with wet or slippery conditions. For more information, see ANSI standard A137.1 section 220.127.116.11.10, available at www.tileusa.com.
- Water, oil, grease, etc. create slippery conditions. Floor applicatons with exposure to these conditions require extra caution in product selection. Not for use on ramps.
- For addtional information, refer to Factors to Consider.
- Since there is a shade variation on all natural products, the tile and trim supplied for your particular installation may not match these samples. Final selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards.
|Floors/Patios (Covered & Uncovered)|
|Floors||Walls||Countertops||Exterior Patios||Exterior Pool Decks|
Neither honed nor polished Geo Flecks is suitable for exterior applications. The sun will etch the material.
|12 x 12||
(11.81" x 11.81")
(30.0 cm x 30.0 cm)
|12 x 24||
(11.81" x 23.62")
(30.0 cm x 60.0 cm)
|18 x 18||
(17.91" x 17.91")
(45.5 cm x 45.5 cm)
|24 x 24||
(23.62" x 23.62")
(60.0 cm x 60.0 cm)
|120 x 55||
(120" x 55")
(305 cm x 140 cm)