Match Point ColorBody™ Porcelain
TruEdge products mean each tile is rectified and modular, which allows for the use of smaller grout joints and even more design flexibility.
Indicates products suitable for exterior applications.
Indicates product is certified by the Porcelain Tile Certification Agency. Daltile is committed to providing only the highest quality porcelain products. Every porcelain product we offer has been certified - or is in the process of being certified - by the PTCA.
Roll over to zoom product
Photo features Match Point in Jet Black and Pure White on the floor. As seen on Extreme Makeover Home Edition, Season 9.
The color saturation of this product is affected by the surface finish. The unpolished and polished finish coordinate but are not an exact match in color tone.
|Unpolished||> 0.42||<0.5%||>450 lbs.||8.0||Resistant||N/A|
|Polished||< 0.42||< 0.5%||>450 lbs.||8.0||Resistant||N/A|
A DCOF value of > 0.42 is the standard for tiles specified for level interior spaces expected to be walked upon when wet, as stated in ANSI A137.1-2012, Section 9.6. For more information about DCOF and the DCOF AcuTest™, click here or visit the Tile Council of North America's website: www.tcnatile.com.
- These tiles have a dynamic coefficient of friction < 0.42 as measured by the DCOF Acutest method. Tiles with DCOF values < 0.42 are not recommended for use in areas with wet or slippery conditions. For more information, see ANSI standard A137.1 section 22.214.171.124.10, available at www.tileusa.com.
- Water, oil, grease, etc. create slippery conditions. Floor applicatons with exposure to these conditions require extra caution in product selection. Not for use on ramps.
- For addtional information, refer to Factors to Consider.
- Since there is a shade variation on all natural products, the tile and trim supplied for your particular installation may not match these samples. Final selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards.
|Target DCOF wet||Suitable|
|Dry & Level - Interior||n/a|
|Wet & Level - Interior||≥ 0.42||*|
|Exterior Applications; Pool Decking & Other Wet Areas with Minimal Footwear||≥ 0.60|
|Ramps & Inclines||≥ 0.65|
Suitable for exterior use in freezing and non-freezing climates, when proper installation methods are followed.
* Unpolished only
Polished surface is only suitable for Dry & Level floor applications.
|12 x 24||
(11 3/4" x 23 9/16")
(29.8 cm x 59.8 cm)
Pieces Per Carton: 8
|24 x 24||
(23 9/16" x 23 9/16")
(59.8 cm x 59.8 cm)
Pieces Per Carton: 4
|Bullnose||S-43C9||3 x 12|
Floor bullnose trim is intended to coordinate with floor tile in the standard 90-degree installation position.