Identity™ ColorBody™ Porcelain
Products can be custom cut into linear and rectangular sizes for unique designs, with straight or beveled edges in a variety of rectangular shapes. Click here for more information.
TruEdge products mean each tile is rectified and modular, which allows for the use of smaller grout joints and even more design flexibility.
Indicates the use of pre-consumer recycled material content in a product.
Indicates product is certified by the Porcelain Tile Certification Agency. Daltile is committed to providing only the highest quality porcelain products. Every porcelain product we offer has been certified - or is in the process of being certified - by the PTCA.
Roll over to zoom product
Photo features Identity in Cashmere Gray Cement 18 x 18 on the floor and Egyptian Glass in Topaz Melange on the wall.
Fabric Floor (Light Polished & Unpolished)
Fabric Mosaic Field (Unpolished)
Grooved Floor (Light Polished & Unpolished)
Cement Floor (Unpolished Only)
Fabric Decorative Accents
Gloss Wall (Ceramic)
Gloss Decorative Accents (Ceramic)
Matte Wall Tile (Ceramic)
Matte Decorative Accents (Ceramic)
Special care should be taken when grouting with dark pigmented colors. A grout release is recommended to prevent finely powdered pigment from lodging in the pores of the tile surface. Use of a latex modified thin-set is recommended for installation. Not for use on ramps.
For proper bonding, medium bed mortar should be utilized in installing tiles with a dimensional length size greater than 20” x 20”, large rectangles or tiles with greater dimensional thickness than normal. Back buttering tiles of this nature in the installation process will also assure proper coverage for bonding.
|Floor Unpolished||> 0.42||> 0.6||> 0.7||<0.5%||>550 lbs.||9.0||Resistant||N/A|
|Floor Light Polished||< 0.42||> 0.5||> 0.6||<0.5%||>550 lbs.||9.0||N/A||N/A|
Dynamic C.O.F. (Wet) value as measured by the DCOF AcuTestTM helps to assess a products suitability for a commercial environment. Read information on D.C.O.F.
|Floors/Patios (Covered & Uncovered)|
|Floors||Walls||Countertops||Exterior Patios||Exterior Pool Decks|
Fabric and Grooved unpolished surfaces are suitable for exterior floors (including pool decks) and walls in freezing and non-freezing climates when proper installation methods are followed. Cement surface and Fabric / Grooved light polished surfaces are suitable for exterior walls in freezing and non-freezing climates when proper installation methods are followed.
|1 x 3 Mosaic||
(11-3/4” x 11-3/4” Sheet)
(29.8 cm x 29.8 cm Sheet)
Mesh-mounted Fabric Unpolished only
|8 x 20||
(7 1/8" x 19 9/32")
(20.0 cm x 50.0 cm)
Pieces Per Carton: 14
|12 x 12||
(11-3/4” x 11-3/4”)
(29.8 cm x 29.8 cm)
Pieces Per Carton: 12
|12 x 24||
(11-3/4” x 23-1/2”)
(29.8 cm x 59.8 cm)
Fabric & Grooved Only
|18 x 18||
(17-5/8” x 17-5/8”)
(44.8 cm x 44.8 cm)
Pieces Per Carton: 59.8 cm x 59.8 cm
SQFT: 23-1/2” x 23-1/2”
Fabric & Cement Only
|24 x 24||
(23-1/2” x 23-1/2”)
(59.8 cm x 59.8 cm)
|Linear Options Size||Shape|
|2 x 24|
|4 x 24|
|6 x 24|
|Cove Base Corner||SC-36C9T||1 x 6|
|Cement Bullnose||S44H9||4 x 18|
|Fabric Bullnose||S44C9||4 x 12|
|Grooved Bullnose||S44F9||4 x 24|
|Cove Base||S-36C9TB||6 x 12|
|Jolly||S-5810J1P||1 x 10|
Cove Base and Floor Bullnose trim is intended to coordinate with floor field tile in the standard 90-degree installation position.