Torreon ™ ColorBody™ Porcelain
When your project goals require sourcing of materials made in the United States, look for this symbol to help you determine which of our product lines help you meet that standard. Icon indicates that all or select items within a series are made in the U.S.A.
TruEdge products mean each tile is rectified and modular, which allows for the use of smaller grout joints and even more design flexibility.
Indicates the use of post-consumer recycled material content in a product.
Indicates the use of pre-consumer recycled material content in a product.
Indicates product is certified by the Porcelain Tile Certification Agency. Daltile is committed to providing only the highest quality porcelain products. Every porcelain product we offer has been certified - or is in the process of being certified - by the PTCA.
Roll over to zoom product
Manufacturing Plant: Muskogee, OK
Special care should be taken when grouting with dark pigmented colors. A grout release is recommended to prevent finely powdered pigments from lodging in the pores of the surface. Use of a latex modified thin-set is recommended for installation.
Since there are variations in all fired ceramic products, the tile and trim supplied for your particular installation may not match these samples. Final color selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards.
|> 0.42||<0.5%||>275 lbs.||8.0||Resistant||N/A|
A DCOF value of > 0.42 is the standard for tiles specified for level interior spaces expected to be walked upon when wet, as stated in ANSI A137.1-2012, Section 9.6. For more information about DCOF and the DCOF AcuTest™, click here or visit the Tile Council of North America's website: www.tcnatile.com.
|Target DCOF wet||Suitable|
|Dry & Level - Interior||n/a|
|Wet & Level - Interior||≥ 0.42|
|Commercial Dining Areas||≥ 0.50|
|Exterior Applications; Pool Decking & Other Wet Areas with Minimal Footwear||≥ 0.60|
|Covered Exterior||≥ 0.60|
|Ramps & Inclines||≥ 0.65|
Suitable for exterior walls in freezing and non-freezing climates when proper installation methods are followed.
|12 x 12||
(11 5/8” x 11 5/8”)
(29.56 cm x 29.56 cm)
Pieces Per Carton: 13
|12 x 24||
(11 5/8” x 23 5/8”)
(29.56 cm x 59.44 cm)
Pieces Per Carton: 8
Special care needs to be given when installing tiles 20” and larger. Please refer to http://www.daltile.com/LargeTiles for information.
|Cove Base||S-36C9T||6 x 12|
|Bullnose||S-43C9||3 x 12|
Cove base and floor bullnose trim are intended to coordinate with floor tile in the standard 90-degree installation position.