Torreon ™ ColorBody™ Porcelain

Made in the USA
Made in the USA

When your project goals require sourcing of materials made in the United States, look for this symbol to help you determine which of our product lines help you meet that standard. Icon indicates that all or select items within a series are made in the U.S.A.

Tru-Edge
Tru-Edge

TruEdge products mean each tile is rectified and modular, which allows for the use of smaller grout joints and even more design flexibility.

Post-Consumer
Post-Consumer

Indicates the use of post-consumer recycled material content in a product.

Pre-Consumer
Pre-Consumer

Indicates the use of pre-consumer recycled material content in a product.

Certified Porcelain
Certified Porcelain

Indicates product is certified by the Porcelain Tile Certification Agency. Daltile is committed to providing only the highest quality porcelain products. Every porcelain product we offer has been certified - or is in the process of being certified - by the PTCA.

Product Image

Roll over to zoom product

Cloud TN95


Pre-Consumer: 1.7%
Post-Consumer: 5.0%
Manufacturing Plant: Muskogee, OK

 

Notes:

  • Special care should be taken when grouting with dark pigmented colors. A grout release is recommended to prevent finely powdered pigments from lodging in the pores of the surface. Use of a latex modified thin-set is recommended for installation.

  • Since there are variations in all fired ceramic products, the tile and trim supplied for your particular installation may not match these samples. Final color selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards.

Tile Thickness:
3/8”
Relative Pricing:
Low
Minimum
Grout Joint
Recommendation:
1/8” (3/16” when rectangular sizes are used in a staggered brick-point pattern where the overlap does not exceed 33%)
Shade Variation:
Medium (V2)
  D.C.O.F. Moisture Breaking   Chemical Abrasion
Wet Absorption Strength MOH's Resistance Resistance
    > 0.42 <0.5%  >275 lbs. 8.0 Resistant N/A

A DCOF value of > 0.42 is the standard for tiles specified for level interior spaces expected to be walked upon when wet, as stated in ANSI A137.1-2012, Section 9.6. For more information about DCOF and the DCOF AcuTest™, click here or visit the Tile Council of North America's website: www.tcnatile.com.

Floor Applications
Target DCOF wet Suitable
Dry & Level - Interior n/a  
Wet & Level - Interior ≥ 0.42  
Commercial Dining Areas ≥ 0.50  
Exterior Applications; Pool Decking & Other Wet Areas with Minimal Footwear ≥ 0.60  
Covered Exterior ≥ 0.60  
Ramps & Inclines ≥ 0.65  
Other Applications
Suitable
Walls/Backsplashes  
Countertops  
Pool Linings  

Notes:

  • Suitable for exterior walls in freezing and non-freezing climates when proper installation methods are followed.

Size     Shape
12 x 12
(11 5/8” x 11 5/8”)
(29.56 cm x 29.56 cm)
Pieces Per Carton: 13
 
  12" x 12"
12 x 24
(11 5/8” x 23 5/8”)
(29.56 cm x 59.44 cm)
Pieces Per Carton: 8
 
  12" x 24"

Notes:

Description   Shape Number Size Shape
Cove Base   S-36C9T 6 x 12 Cove Base S-36C9T - 6" x 12"
Bullnose   S-43C9 3 x 12 Bullnose S-43C9 - 3" x 12"

Notes:

  • Cove base and floor bullnose trim are intended to coordinate with floor tile in the standard 90-degree installation position.