Plaza Nova™ ColorBody™ Porcelain

Linear Options
Linear Options

Products can be custom cut into linear and rectangular sizes for unique designs, with straight or beveled edges in a variety of rectangular shapes. Click here for more information.

Tru-Edge
Tru-Edge

TruEdge products mean each tile is rectified and modular, which allows for the use of smaller grout joints and even more design flexibility.

Certified Porcelain
Certified Porcelain

Indicates product is certified by the Porcelain Tile Certification Agency. Daltile is committed to providing only the highest quality porcelain products. Every porcelain product we offer has been certified - or is in the process of being certified - by the PTCA.

Green Squared
Green Squared

Daltile is proud to champion innovation within the industry, as one of the first to support Green Squared, a new standard for sustainable projects. Most of our products have already achieved Green Squared Certification and meet the industry’s toughest green standard to date.

Product Image

Roll over to zoom product

White Image PN94


Pre-Consumer: 0.0%
Post-Consumer: 0.0%
Origin: China

 

Notes:

  • Special care needs to be given when installing tiles 20” and larger. Please refer to http://www.daltile.com/LargeTiles for information.

  • Special care should be taken when grouting with dark pigmented colors. A grout release is recommended to prevent finely powdered pigments from lodging in the pores of the surface. Use of a latex modified thin-set is recommended for installation.

  • Since there are variations in all fired ceramic products, the tile and trim supplied for your particular installation may not match these samples. Final color selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards.

  • For additional information refer to “Factors to Consider” at: www.daltile.com/information/factors-to-consider.

  • Water, oil, grease etc. create slippery conditions. Floor applications with exposure to these conditions require extra caution in product selection. Not for use on ramps.

Tile Thickness:
3/8”
Minimum
Grout Joint
Recommendation:
1/8” (3/16” when rectangular sizes are used in a staggered brick-point pattern where the overlap does not exceed 33%)
Shade Variation:
Medium (V2)
  D.C.O.F. Moisture Breaking   Chemical Abrasion
Wet Absorption Strength MOH's Resistance Resistance
  Floor  > 0.42 <0.5%  >400 lbs. 8.0 Resistant N/A

A DCOF value of > 0.42 is the new standard for tiles specified for commercial application in standard A137.1-2012, Section 9.6. It replaces the SCOF value of > 0.60 referenced in ASTM C1028. For more information on the correlation between the two values and about the DCOF AcuTest, click here for more information or visit the Tile Council of North America's website: www.tcnatile.com

COMMERCIAL USAGE
APPLICATION INTERIOR EXTERIOR
  Residential Light
Commercial
Commercial Residential Commercial
Floors/Patios (Covered & Uncovered)  
Walls/Backsplashes
Countertops
Pool Decking          
Pool Linings
RESIDENTIAL USAGE
APPLICATION
Floors Walls Countertops Exterior Patios Exterior Pool Decks
F W C E

Notes:

  • Suitable for exterior walls in freezing and non-freezing climates when proper installation methods are followed.

Size     Shape
12 x 12
(11-13/16” x 11-13/16”)
(30 cm x 30 cm)
Pieces Per Carton: 11
SQFT: 10.65
 
  12" x 12"
12 x 24
(11-13/16” x 23-5/8”)
(30 cm x 60 cm)
Pieces Per Carton: 5
SQFT: 9.68
 
  12" x 24"
 Linear Options Size     Shape
2 x 24
(2" x 23-5/8")
(4.67 cm x 60 cm)
Pieces: 20
SQFT: 6.66
  2 x 24
4 x 24
(4" x 23-5/8")
(9.73 cm x 60 cm)
Pieces: 6.46
SQFT: 10
  4 x 24
6 x 24
(6" x 23-5/8")
(14.63 cm x 60 cm)
Pieces: 10.65
SQFT: 11
  6 x 24

Notes:

  • Three sizes will also be offered in Linear Options – 2” x 24”, 4” x 24” and 6” x 24”.

Description   Shape Number Size Shape
Bullnose   P-43C9 3 x 12 Bullnose P-43C9 - 3" x 12"
Cove Base   P-36C9T 6 x 12 Cove Base P-36C9T - 6" x 12"
Cove Outcorner   PC-36C9T 1 x 6 Cove Outcorner PC-36C9T - 1" x 6"

Notes:

  • Cove Base and Floor Bullnose trim are intended to coordinate with floor field tile in the standard 90-degree installation position.