Sierra ™ Ceramic Floor & Wall

Pre-Consumer
Pre-Consumer

Indicates the use of pre-consumer recycled material content in a product.

Product Image

Roll over to zoom product

Photo features Sierra Vail.



 
If you're looking for a tile that's as eye-catching as it is durable, try Daltile's Sierra series. Subtle tone variations in this single-fired tile produce a striking visual effect in area installations. Sierra has a soft matte glaze and is also available with an abrasive surface for extra slip resistance.
Tile Thickness:
5/16"
Relative Pricing:
Low
Minimum
Grout Joint
Recommendation:
3/16"
Shade Variation:
Low (V1)
  D.C.O.F. Moisture Breaking   Chemical Abrasion
Wet Absorption Strength MOH's Resistance Resistance
    < 0.42 <3.0%  >250 lbs 7 Resistant 3 - Heavy Residential or Light Commercial

A DCOF value of > 0.42 is the standard for tiles specified for level interior spaces expected to be walked upon when wet, as stated in ANSI A137.1-2012, Section 9.6. For more information about DCOF and the DCOF AcuTestâ„¢, click here or visit the Tile Council of North America's website: www.tcnatile.com.

Manufacturer Advisory:

  • These tiles have a dynamic coefficient of friction < 0.42 as measured by the DCOF Acutest method. Tiles with DCOF values < 0.42 are not recommended for use in areas with wet or slippery conditions. For more information, see ANSI standard A137.1 section 6.2.2.1.10, available at www.tileusa.com.
  • Water, oil, grease, etc. create slippery conditions. Floor applicatons with exposure to these conditions require extra caution in product selection. Not for use on ramps.
  • For addtional information, refer to Factors to Consider.
  • Since there is a shade variation on all natural products, the tile and trim supplied for your particular installation may not match these samples. Final selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards.
Floor Applications
Target DCOF wet Suitable
Dry & Level - Interior n/a  
Wet & Level - Interior ≥ 0.42  
Commercial Dining Areas ≥ 0.50  
Exterior Applications; Pool Decking & Other Wet Areas with Minimal Footwear ≥ 0.60  
Covered Exterior ≥ 0.60  
Ramps & Inclines ≥ 0.65  
Other Applications
Suitable
Walls/Backsplashes  
Countertops  
Pool Linings  

Notes:

  • Suitable for exterior walls in non-freezing climates when proper installation methods are followed. Not for use on ramps.

Size     Shape
12 x 12 Field Tile
(11 13/16" x 11 13/16")
(30.0 cm x 30.0 cm)
Pieces Per Carton: 11
SQFT: 11.00
(Not available in abrasive.)
 
  12" x 12" Field Tile
Description   Shape Number Size Shape
Bullnose   P-43C9 3 x 12 Bullnose P-43C9 - 3" x 12"

Notes:

  • Floor bullnose trim is intended to coordinate with floor tile in the standard 90-degree installation position.