Fidenza Glazed Porcelain
Indicates the use of post-consumer recycled material content in a product.
Indicates product is certified by the Porcelain Tile Certification Agency. Daltile is committed to providing only the highest quality porcelain products. Every porcelain product we offer has been certified - or is in the process of being certified - by the PTCA.
Roll over to zoom product
Photo features Fidenza in Cafe 12 x 12 in a diagonal pattern, with 3 x 12 Universal Border in hallway. Wall features Bianco in 9 x 12 with 2 x 2 Mosaic and 2 x 9 Stone and Glass Accent with Champagne Gold Tumbled Stone Chair Rail.
Floor Field Tile
Ceramic Wall Field Tile (9 X 12)
Ceramic Wall Field Tile (6 X 6)
Mosaic Field Tile (2 X 2)
Backsplash Design Ideas
Use of a latex modified thin-set is recommended for installation.
Since there are variations in all fired ceramic products, the tile and trim supplied for your particular installation may not match these samples. Final color selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards.
|Floor||> 0.42||<0.5%||>275 lbs.||8||Resistant||N/A|
|Wall||< 0.42||<20.0%||100-230 lbs.||4.0-6.5||Resistant||N/A|
|Mosaics||< 0.42||<3%||>250 lbs.||8||Resistant||N/A|
A DCOF value of > 0.42 is the new standard for tiles specified for commercial application in standard A137.1-2012, Section 9.6. It replaces the SCOF value of > 0.60 referenced in ASTM C1028. For more information on the correlation between the two values and about the DCOF AcuTest, click here for more information or visit the Tile Council of North America's website: www.tcnatile.com
- These tiles have a dynamic coefficient of friction less than 0.42 as measured by the DCOF AcutestTM method. Tiles with DCOF Acutest values less than .42 are not recommended for use in areas with wet or slippery conditions. If such tiles are used as a walking surface where water, ice, oil, grease and/or other substances are present, such a condition could cause a reduction in foot traction and become unexpectedly slippery resulting in a fall and personal injury. See ANSI standard A137.1 section 18.104.22.168.10, available at www.tcnatile.com/section22.214.171.124.10.html.
- Water, oil, grease, etc. create slippery conditions. Floor applicatons with exposure to these conditions require extra caution in product selection. Not for use on ramps.
- For addtional information, refer to Factors to Consider.
- Since there is a shade variation on all natural products, the tile and trim supplied for your particular installation may not match these samples. Final selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards.
|Target DCOF wet||Suitable|
|Dry & Level||n/a|
|Wet & Level||≥ 0.42|
|Commercial Dining Areas||≥ 0.50|
|Pool Decking & other wet areas with minimal footwear||≥ 0.60|
|Covered Exterior||≥ 0.60|
|Interior Ramps, Inclines and Uncovered Exterior||≥ 0.65|
Wall tile suitable for residential bathroom floors.
Floor tile suitable for residential exterior patios.
Wall tile not suitable for commercial floors.
|2 x 2 Mosaic||
(24" x 12" Sheet)
(60.96 cm x 30.48 cm)
Pieces Per Carton: 12
|2 x 9 Stone and Glass Accent||
(2 13/16" x 9")
Pieces Per Carton: 10
|3 x 12 Universal Border||
(2 13/16" x 11")
(10 cm x 30 cm)
|6 x 6 Wall Tile||
(6" x 6")
(15.2 cm x 15.2 cm)
Pieces Per Carton: 50
|9 x 12 Wall Tile||
(8 15/16" x 11 15/16")
(22.7 cm x 30.3 cm)
Pieces Per Carton: 15
|12 x 12 Floor Tile||
(11 13/16" x 11 13/16")
(30 cm x 30 cm)
Pieces Per Carton: 11
|18 x 18 Floor Tile||
(17 3/4" x 17 3/4")
(45.2 cm x 45.2 cm)
Pieces Per Carton: 8
Floor bullnose trim is intended to coordinate with floor field tile in the standard 90-degree installation position.