Mesa Ledge Stack Manufactured Stone

Made in the USA
Made in the USA

When your project goals require sourcing of materials made in the United States, look for this symbol to help you determine which of our product lines help you meet that standard. Icon indicates that all or select items within a series are made in the U.S.A.

Exterior Product
Exterior Product™

Indicates products suitable for exterior applications.

Product Image

Roll over to zoom product

Moon Glow MS80*


Pre-Consumer: 0.0%
Post-Consumer: 0.0%
Manufacturing Plant: Plano, TX

Add To My Favorites Print Page
 
Experience a clean, urban look
in a variety of modern colors.

Notes:

  • * Special Order only.

Size   Random 4.5" - 18" long by 3/4" - 4" high

Installation

Average Thickness Application Recommendation Coverage Aesthetic Characteristics
1.5" Dry-Stacked or
1/2" Grout Joint 		150 sq. ft. per pallet, dry-stacked; 170 sq. ft. per pallet, grouted RANDOM SHADE VARIATION
Extreme color and texture variation from piece to piece and within each piece for a random look. Look of final installation will be unique. Review range of product before making final selection.

  Maintenance

Care should be taken to avoid smearing mortar on the surface of the veneers. Accidental smears should be removed using a dry whisk broom only after mortar has dried completely. Never use a wet brush or wire brush. Do not power-wash, sandblast, use acid or acid-based products. Dirt or other materials may be removed with a strong solution of granulated soap or detergent and water with a bristle brush. Do not use a wire brush as it will cause damage to the surface. Rinse immediately with fresh water. Regular maintenance requires rinsing the wall with water occasionally to remove dirt.

Density of Structural Lightweight Concrete Freeze-Thaw/Efflorescence Comprehensive Strength Flexure Strength Tensile Strength Water Absorption Shear Bond Strength
ASTM C-567 ASTM C-67 ASTM C-192, C-39 ASTM C-348 ASTM C-190 UBC Std. 15-5 & 32-12 ASTM C-482
15 psf maximum Less than 3% mass loss in 50 cycles/None visible Minimum of 1800 psi in 28 days No more than 10% deviation No more than 10% deviation 22% average maximum Minimum 50 psi
Residential Light Commercial Coverage Exteriors
Walls/Backsplashes

Notes:

  • Suitable for interior and exterior vertical surfaces.

  • Appropriate for use in exterior wall applications in both freezing and non-freezing climates when proper installation methods are followed.

  • Not for exterior use below grade.

  • Not for use in direct contact with pool chemicals or in wet areas such as showers.

DOWNLOADS

LINKS