Cristallo Select™ Ceramic Floor & Wall

Product Image

Roll over to zoom product

Aquamarine CR50

Pre-Consumer: 30.0%
Post-Consumer: 0.0%
Origin: Mexico



  • * Field Tile is only suitable as a decorative accent or border.

  • ** Glass tiles may show scratches.

  • Accents are only for use on walls, not for use on ramps.

  • Liners are for walls and backsplashes only.

  • Accents available in all colors (shown here in Smoky Topaz CR51).

Tile Thickness:
Grout Joint
Shade Variation:
Medium (V2)
  D.C.O.F. Moisture Breaking   Chemical Abrasion
Wet Absorption Strength MOH's Resistance Resistance
  Field Tile Wall  < 0.42 < 0.05%  > 900 lbs. 4 Resistant N/A
  Wall Liners  N/A < 0.05%  > 900 lbs. 4 Resistant N/A

A DCOF value of > 0.42 is the new standard for tiles specified for commercial application in standard A137.1-2012, Section 9.6. It replaces the SCOF value of > 0.60 referenced in ASTM C1028. For more information on the correlation between the two values and about the DCOF AcuTest, click here for more information or visit the Tile Council of North America's website:

Manufacturers Warning:

  • These tiles have a dynamic coefficient of friction less than 0.42 as measured by the DCOF AcutestTM method. Tiles with DCOF Acutest values less than .42 are not recommended for use in areas with wet or slippery conditions. If such tiles are used as a walking surface where water, ice, oil, grease and/or other substances are present, such a condition could cause a reduction in foot traction and become unexpectedly slippery resulting in a fall and personal injury. See ANSI standard A137.1 section, available at
  • Water, oil, grease, etc. create slippery conditions. Floor applicatons with exposure to these conditions require extra caution in product selection. Not for use on ramps.
  • For addtional information, refer to Factors to Consider.
  • Since there is a shade variation on all natural products, the tile and trim supplied for your particular installation may not match these samples. Final selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards.
  Residential Light
Commercial Residential Commercial
Floors/Patios (Covered & Uncovered)      
Pool Decking          
Pool Linings    
Floors Walls Countertops Exterior Patios Exterior Pool Decks
Size     Shape
3/4” x 8” Small Rope Accent
(3/4” x 7-13/16”)
(1.8 cm x 19.8 cm)
Pieces Per Carton: 100
  3/4” x 8” Small Rope Accent
1” x 8” Accent
(1-1/4” x 7-13/16”)
(3.1 cm x 19.8 cm)
Pieces Per Carton: 100
  1” x 8” Accent
1-1/2” x 8” Scroll Accent
(1-5/8” x 7-13/16”)
(4.1 cm x 19.8 cm)
Pieces Per Carton: 60
  1-1/2” x 8” Scroll Accent
2” x 8” Cornice Accent
(1-7/8" x 7-13/16")
(4.7 cm x 19.8 cm)
Pieces Per Carton: 60
  2” x 8” Cornice Accent
3 x 6 Field Tile
(2-13/16” x 5-13/16”)
(7.2 cm x 14.8 cm)
Pieces Per Carton: 56
  3" x 6" Field Tile
4 x 4 Field Tile
(3-13/16” x 3-13/16”)
(9.7 cm x 9.7 cm)
Pieces Per Carton: 72
SQFT: 8.00
  4" x 4" Field Tile