Cliff Pointe ™ ColorBody™ Porcelain
When your project goals require sourcing of materials made in the United States, look for this symbol to help you determine which of our product lines help you meet that standard. Icon indicates that all or select items within a series are made in the U.S.A.
Products can be custom cut into linear and rectangular sizes for unique designs, with straight or beveled edges in a variety of rectangular shapes. Click here for more information.
Indicates products suitable for exterior applications.
Indicates the use of post-consumer recycled material content in a product.
Indicates the use of pre-consumer recycled material content in a product.
Indicates product is certified by the Porcelain Tile Certification Agency. Daltile is committed to providing only the highest quality porcelain products. Every porcelain product we offer has been certified - or is in the process of being certified - by the PTCA.
Roll over to zoom product
Photo features Cliff Pointe in Sunrise 12 x 12 field tile.
Since there are variations in all fired ceramic products, the tile and trim supplied for your particular installation may not match these samples. Final selection should be made from actual tiles and trim, and not from tile and trim samples and color reproductions. Manufactured in accordance with ANSI A137.1 standards.
Special Care should be taken when grouting with dark pigmented colors. A grout release is recommended to prevent finely powdered pigments from lodging in the pores of the tile surface. Use of a modified latex thin-set is recommended for installation. Not for use on ramps.
|Floor||> 0.42||<0.5%||=275 lbs.||9||Resistant||N/A|
A DCOF value of > 0.42 is the new standard for tiles specified for commercial application in standard A137.1-2012, Section 9.6. It replaces the SCOF value of > 0.60 referenced in ASTM C1028. For more information on the correlation between the two values and about the DCOF AcuTest, click here for more information or visit the Tile Council of North America's website: www.tcnatile.com
|Target DCOF wet||Suitable|
|Dry & Level||n/a|
|Wet & Level||≥ 0.42|
|Commercial Dining Areas||≥ 0.50|
|Pool Decking & other wet areas with minimal footwear||≥ 0.60|
|Covered Exterior||≥ 0.60|
|Interior Ramps, Inclines and Uncovered Exterior||≥ 0.65|
Suitable for residential exterior floors and walls in freezing and non-freezing climates when proper installation methods are followed.
Suitable for commercial exterior patios (excluding pool decks) and walls in freezing and non-freezing climates when proper installation methods are followed.
|12 x 12 Field Tile||
(11 13/16" x 11 13/16")
(30.0 cm x 30.0 cm)
Pieces Per Carton: 16
|18 x 18 Field TIle||
(17 11/16" x 17 11/16")
(45.0 cm x 45.0 cm)
Pieces Per Carton: 8