Vibe™ ColorBody™ Porcelain
Linear Options
Products can be custom cut into linear and rectangular sizes for unique designs, with straight or beveled edges in a variety of rectangular shapes. Click here for more information.
Tru-Edge
TruEdge products mean each tile is rectified and modular, which allows for the use of smaller grout joints and even more design flexibility.
Pre-Consumer
Indicates the use of pre-consumer recycled material content in a product.
Certified Porcelain
Indicates product is certified by the Porcelain Tile Certification Agency. Daltile is committed to providing only the highest quality porcelain products. Every porcelain product we offer has been certified - or is in the process of being certified - by the PTCA.
Roll over to zoom product
Photo features Vibe in Techno Black 18 x 18 field tile.
Notes:
Special Care should be taken when grouting with dark pigmented colors. A grout release is recommended to prevent finely powdered pigments from lodging in the pores of the tile surface. Use of a modified latex thin-set is recommended for installation. Not for use on ramps.
Since there are variations in all fired ceramic products, the tile and trim supplied for your particular installation may not match these samples. Final selection should be made from actual tiles and trim, and not from tile and trim samples and color reproductions. Manufactured in accordance with ANSI A137.1 standards.
Installation Requirement: For proper bonding, medium bed mortar should be utilized in installing tiles with a dimensional length size greater than 20” x 20”, large rectangles or tiles with greater dimensional thickness than normal. Back buttering tiles of this nature in the installation process will also assure proper coverage for bonding.
Grout Joint:
| D.C.O.F. | C.O.F. | Moisture | Breaking | Chemical | Abrasion | |||
| Wet | Wet | Dry | Absorption | Strength | MOH's | Resistance | Resistance | |
| Unpolished | > 0.42 | > 0.6 | > 0.7 | <0.5% | >450 lbs. | 8 | Resistant | N/A |
| Light Polished | < 0.42 | > 0.5 | > 0.6 | <0.5% | >450 lbs. | 8 | Resistant | N/A |
Dynamic C.O.F. (Wet) value as measured by the DCOF AcuTestTM helps to assess a products suitability for a commercial environment. Read information on D.C.O.F.
| COMMERCIAL USAGE | |||||
| APPLICATION | INTERIOR | EXTERIOR | |||
| Residential | Light Commercial |
Commercial | Residential | Commercial | |
| Floors/Patios (Covered & Uncovered) |
|
|
|
|
|
| Walls/Backsplashes |
|
|
|
|
|
| Countertops |
|
|
|
|
|
| Pool Linings |
|
|
|
|
|
| RESIDENTIAL USAGE | ||||
| APPLICATION | ||||
| Floors | Walls | Countertops | Exterior Patios | Exterior Pool Decks |
| F | W | C | E | |
Notes:
Suitable for residential exterior floors and walls (unpolished surface only) in freezing and non-freezing climates when proper installation methods are followed.
Suitable for commercial exterior walls in freezing and non-freezing climates when proper installation methods are followed.
†† Light polished wet areas/exterior floor use.
| Size | Shape | ||
| 12 x 12 Field Tile |
(11 3/4" x 11 3/4") ((29.8 cm x 29.8 cm)) Pieces Per Carton: 12 SQFT: 11.62 |
 |
|
| 12 x 24 Field Tile |
(11 3/4" x 23 1/2") ((29.8 cm x 59.8 cm)) Pieces Per Carton: 6 SQFT: 11.62 |
 |
|
| 18 x 18 Field Tile |
(17 5/8" x 17 5/8") ((44.8 cm x 44.8 cm)) Pieces Per Carton: 6 SQFT: 13.07 |
 |
|
| 24 x 24 Field Tile |
(23 1/2" x 23 1/2") ((59.8 cm x 59.8 cm)) Pieces Per Carton: 4 SQFT: 15.49 |
 |
| Linear Options Size | Shape | ||
| 2 x 24 |
(2" x 23 1/2") (4.67 cm x 59.8 cm) Pieces: 20 SQFT: 6.66 |
 |
|
| 4 x 24 |
(4" x 23 1/2") (9.73 cm x 59.8 cm) Pieces: 10 SQFT: 6.46 |
 |
|
| 6 x 24 |
(6" x 23 1/2") (15.25 cm x 59.8 cm) Pieces: 11 SQFT: 10.65 |
 |
| Description | Shape Number | Size | Shape | |
| Bullnose | S-43C9 | 3 x 12 |  |
|
| Cove Base | S-36C9T | 6 x 12 |  |
|
| Cove Base Outcorner | SC-36C9T | 1 x 6 |  |
Notes:
Cove Base and Floor Bullnose trim is intended to coordinate with floor field tile in the standard 90-degree installation position.