Kimona Silk™ ColorBody™ Porcelain

Tru-Edge
Tru-Edge

TruEdge products mean each tile is rectified and modular, which allows for the use of smaller grout joints and even more design flexibility.

Pre-Consumer
Pre-Consumer

Indicates the use of pre-consumer recycled material content in a product.

Certified Porcelain
Certified Porcelain

Indicates product is certified by the Porcelain Tile Certification Agency. Daltile is committed to providing only the highest quality porcelain products. Every porcelain product we offer has been certified - or is in the process of being certified - by the PTCA.

Product Image

Roll over to zoom product

Features Kimona Silk Water Chestnut in 2 x 24 and 12 x 24 field tile on the floor.



 

Notes:

  • Special care should be taken when grouting with dark pigmented colors. A grout release is recommended to prevent finely powdered pigments from lodging in the pores of the surface. Use of a latex modified thin-set is recommended for installation.

  • Since there are variations in all fired ceramic products, tile and trim supplied for your particular installation may not match these samples. Final color selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards.

  • Use of a latex modified thin-set is recommended for installation.

Tile Thickness:
3/8"
Relative Pricing:
Medium - High
Minimum
Grout Joint
Recommendation:
1/8” (3/16" when rectangular sizes are used in a staggered brick-joint pattern, where the overlap does not exceed 33%)
Shade Variation:
Medium (V2)
  D.C.O.F. Moisture Breaking   Chemical Abrasion
Wet Absorption Strength MOH's Resistance Resistance
    > 0.42 <0.5%  >450 lbs. 8 Resistant N/A

A DCOF value of > 0.42 is the new standard for tiles specified for commercial application in standard A137.1-2012, Section 9.6. It replaces the SCOF value of > 0.60 referenced in ASTM C1028. For more information on the correlation between the two values and about the DCOF AcuTest, click here for more information or visit the Tile Council of North America's website: www.tcnatile.com

COMMERCIAL USAGE
APPLICATION INTERIOR EXTERIOR
  Residential Light
Commercial
Commercial Residential Commercial
Floors/Patios (Covered & Uncovered)  
Walls/Backsplashes
Countertops
Pool Decking          
Pool Linings    
RESIDENTIAL USAGE
APPLICATION
Floors Walls Countertops Exterior Patios Exterior Pool Decks
F W C E

Notes:

  • Suitable for exterior walls in freezing and non-freezing climates when proper installation methods are followed.

Size     Shape
2 x 2 Mosaic Sheet
(11 3/4" x 11 3/4")
(29.8 cm x 29.8 cm)
Pieces Per Carton: 11
SQFT: 10.65
Mesh-mounted on 12 x 12 sheets.
 
  2" x 2" Mosaic Sheet
2 x 24 Field Tile
(1 15/16" x 23 9/16")
(4.9 cm x 59.8 cm)
Pieces Per Carton: 30
SQFT: 10.00
 
  2" x 24" Field Tile
12 x 12 Field Tile
(11 3/4" x 11 3/4")
(29.8 cm x 29.8 cm)
Pieces Per Carton: 11
SQFT: 10.65
 
  12" x 12" Field Tile
12 x 24 Field Tile
(11 3/4" x 23 9/16")
(29.8 cm x 59.8 cm)
Pieces Per Carton: 8
SQFT: 15.49
 
  12" x 24" Field Tile
24 x 24 Field Tile
(23 9/16" x 23 9/16")
(59.8 cm x 59.8 cm)
Pieces Per Carton: 4
SQFT: 15.49
 
  24" x 24" Field Tile
Description   Shape Number Size Shape
Bullnose   S-43C9 3 x 12 Bullnose S-43C9 - 3" x 12"
Cove Base   S-36C9T 6 x 12 Cove Base S-36C9T - 6" x 12"
Cove Base Outcorner   SC-36E9T 1 x 6 Cove Base Outcorner SC-36E9T - 1" x 6"

Notes:

  • Cove Base and Floor Bullnose trim are intended to coordinate with floor field tile in the standard 90-degree installation position.